Hallo,
I would be in for a board as well
Do you provide the BOM?
You're currently viewing posts by Pinsider nihonmasa.
Click here to go back to viewing the entire thread.
If anyone in Switzerland or nearby wants to try, I will gladly take a board and all parts
Getting the BOM parts is a nightmare in Switzerland...
Or it's all from aliexpress where 22% will never arrive and 57% will be here in more than 2 months...
Hi Amok,
Mouser does ship to Switzerland, but as usual it's 3 times more expensive
BOM would cost me 94€approximately if ordered in Switzerland...
I entered the BOM in Mouser as a test (with a few of the SMDs by 10 instead of less to take advantage of better prices from 10 unites) and ends up with roughly 94€ of components -_-
So that amount makes it barely ok on the long term, but clearly expensive for a test only that I might screw up XD
Mouser (resized).JPGQuoted from PvL__N:Wauw nice post and a lovely project!
This is what I'm looking for my "Programming with Arduino MCU" lessons!
I'm going to order the board, are there other people that need 1 board (Need to order min5pcs!), area Rotterdam Netherlands?
Would gladly take 1 or 2 if you can ship to switzerland
Padded enveloppe should be fine
Amok: will check that, thx!
You're currently viewing posts by Pinsider nihonmasa.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/arduino-pinball-controller?tu=nihonmasa and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.