I know this is a dead topic... but I'm wanting to replace the decals on a Funhouse... I do not mind removing the old decals. My issue is if I have to stripe the machine, it may never work again...LOLOL!
So I was thinking, remove the playfield, and SS rails and work on the cabinet with heat gun removing the old decals. I would carefully protect and cover the cabinet internals from dust. Cabinet is in good shape, I would fill bad sections, sand area and then repaint cabinet with a primer. Again lite sand and apply decals.
So my question is, can I do this without removing all internals and striping the cabinet?
Thanks guys!