Web Archive.
viperrwk
You're currently viewing posts by Pinsider viperrwk.
Click here to go back to viewing the entire thread.
Assume you verified the ROM after burning, checked your install, no bent/broken pins etc etc.
I have not checked the code on IPDB to see if it is correct/complete/functioning or how it compares to what's on the internet archive. That's an easy first step,
viperrwk
When you upgrade the CPU ROM you also have to upgrade the display ROM as well so that the major revision numbers match otherwise funky things happen...
viperrwk
Not sure what the issue is you're asking about now. Is it that it's hanging after boot (and this was the video before you upgraded), or the display not showing the correct version after you upgraded or both?
viperrwk
Did you perform a factory reset after upgrading the ROM? Can you run the diagnostics to check if all the subsystems are working correctly? Knowing what's working and what's not will help to narrow down the problem. Shot in the dark guess at the problem is battery corrosion but without seeing the board or knowing any more it is only a guess.
You may also want to start a new thread or change the thread title of this one to get more people to respond to your problem.
viperrwk
You're currently viewing posts by Pinsider viperrwk.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/apollo-13-cpu-rom-501?tu=viperrwk and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.