Johnny Mnemonic
Williams, 1995My understanding is that operators removed the 360 G spinner because it ran scores too high and increased replays. The one on ours is missing and it upsets my autistic son who needs things to be ‘in their correct place.’ I
the spinner design (The wire part) is different than most. Original is NLA. Has anyone been able to fabricate or modify one that works?
if you are just looking for the spinner:
Would need decals as well.
Do you have the rest of the mechanism or is that missing as well?
I may have to keep looking. The German company has one for apx. $12. Unfortunately the shipping cost is about $130 for this 12 ounce part!
The junkyard spinner should work
Unfortunately the one from pinball centre has been manufactured incorrectly by being weighted wrong so the spinner sits the wrong way up and rests against the switch. I have tried 2 of them and both weighted wrong, I have ordered a junkyard spinner so see if that is correct. If only I could get the wire that goes i side the spinner I could repair my original one. I have tried making my own wire which was not too bad but just not good enough with the sharp bends.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/anyone-fabricated-a-johnny-mnemonic-spinner and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Olathe, KS
Oldebroek