What about the door? Can you make a picture on paper with the dimensions and door ???
You're currently viewing posts by Pinsider rai.
Click here to go back to viewing the entire thread.
6 + 6 would be the absolute max with a corridor in the middle of 3 feet (?) would be tight in the middle tho removing the glass.
I’m saying 33 inches each pin counting a bit of room between the heads.
Quoted from Sluggo39:13x13 has 4 pins
[quoted image]
Is there not enough room on the far wall for a second row? Least you can put two back to back pushed against the far wall?
Quoted from jrockne:My back game room is 13x18. I’ve got 8 pins and two arcade cabinets and comfortable amount of space for a person at each machine. I loose some room because of the closet under the stairs.
Here’s a few photos for reference:
It’s a bit of a mess in there right now... I’ve been working on the adjacent hallway.
[quoted image][quoted image][quoted image]
You fit 7 pins on an 18 foot wall? That’s 31 inches each pin.
That 13’ is a good extra foot allowing you to have room in the middle with two pins on opposite walls.
My new gameroom is 22 x 16 which should allow 8 on one side maybe 6-7 on the other because of the way one wall is cut on an angle. 14-15
Quoted from jrockne:Yup! I figured the picture would show that, but I can take a photo of the tape measure too if you'd like... J/K
They are tight, but still have almost 2" between the heads.
I believe you I just trying to figure because my one wall is 18 feet so that means I can do 8 + 7
I need to remove this 2 sided fireplace to get the wall space plus don’t want fireplace in game room.
8018C33E-6D63-4A07-A106-61E59AD88A4F (resized).jpegC42A4791-DD33-40D4-91E2-2206E1CE3AC1 (resized).jpeg
Quoted from jrockne:Yeah, This hobby sure takes up a lot of space.
When we bought the house it had the room size as 14x20, and I didn't think to measure. turned out to be 13x18, so I'm lucky I was able to fit the 7 along the wall. I wish it would have been the 20 though so I could have more space between them.
I have 10 pins currently but like to have room to add without selling. We just moved to Florida no basement so hard to find a good room. I sold 3 before the move Tron, Tspp and SM was super sad but it’s good to have extra room. I hated selling but it’s nice to add new blood. I’m getting R&M to bring up to 11 total.
Does anyone know of a room configuration tool? I saw one while back that you can fit furniture, beds desk etc. in to move around.
Would be great to have can use with pinball machine or least tables the size of a machine.
or this https://www.havertys.com/furniture/room-planner
you can make a desk the same size as a pinball machine.
actually Havertys has a desk measures 32x68 inches can substitute for a pinball machine.
Quoted from jrockne:My back game room is 13x18.
let's start here with 7 pins on a 18 foot wall you could have 9 pins without having any interference when you need to slide off a glass.
More can fit (up to 14) but you won't have enough room to slide the glass off without moving the pin out of it's place.
You're currently viewing posts by Pinsider rai.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/anyone-12x18-gameroom?tu=rai and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.