Is there any difference between this spiderman and spiderman black other than the backglass with a black spiderman?
Is there any difference between this spiderman and spiderman black other than the backglass with a black spiderman?
Quoted from aeonblack:I think the blacks came with the shaker motor standard, and the other ones didn't?
That's right I owned a black plus backglass rails lockdown bar that's about it
Quoted from c2scanada:Scared Stiff for sale or trade +/- Cash
Looking for
Stern spiderman
Eightball Deluxe Standard
Jacks Open
Fathom
Centigrade 37
I have a cheap Fathom..... If you can find a backbox for the body. lol
Quoted from Linkage:I have a cheap Fathom..... If you can find a backbox for the body. lol
I just posted offering to help out. I'm going up to the Quebec City Show May 16 & 17. If stuff gets here in April or early May. My 5' x 8' trailer is going up empty. So also if any locals have pins for sale, & you can do a deal. They can hitch a free ride, @ owners risk.
Nice Spidey. Wish I liked the game more, but not enough to make the buy yet.
Either way, glws, it looks great!
I'm looking for a Phantom of the Opera, Pinbot or something around that period. Not looking for collector condition or price. Want something that needs a little work but not major rebuild.
Hey folks,
Well, I thought I'd give this thread first kick at the can. I'll be posting this on the marketplace later today, but for now...
I'm putting up for sale my newly acquired AC/DC Pro. I have another local deal that I'd like to make so this needs to go to fund it, and also to fund the parts I need to finish up a couple of other machines I have. I'm looking for a quick, no-nonsense, sale so please keep the tire kicking to a minimum.
I only have one picture on this computer but I'm going down to my shop after posting this to take proper pictures to post.
This game was lightly routed and there have been no lockbar modifications made to the cabinet.The playfield is in perfect condition and the game plays 100% with no issues. I have swapped out the incandescent bulbs for the inserts with LEDs, but the GI and flashers are incandescent. This is a second run game with the reinforced lightning bolts. There is one broken plastic (the tip of the one that holds the far left lightning bolt) and the lockdown bar is tight on the right side which has caused the front decal to wrinkle underneath the bar, but isn't terribly noticeable and can be fixed if desired. There is also a nick on the "Fire" metal faceplate on the lockdown bar. These are just small issues, but worth mentioning in the spirit of full disclosure.
The game is located in Kelowna, BC, and will be available for pickup/inspection, or I can ship at the buyer's expense.
I am asking $4,500 CDN with the LED inserts, or I can remove them and put the incandescent bulbs back in and the price will be adjusted to $4,400 CDN. I'll be listing this in the marketplace for $3,600USD so I believe my pricing is fair. Not interested in trades at this time.
Send me a PM if you are interested and we'll go from there. I'll also update a little later on with more detailed pictures. Here's the only one I have on this computer currently.
Cheers,
Greg
Quoted from greatwichjohn:I just posted offering to help out. I'm going up to the Quebec City Show May 16 & 17. If stuff gets here in April or early May. My 5' x 8' trailer is going up empty. So also if any locals have pins for sale, & you can do a deal. They can hitch a free ride, @ owners risk.
Will keep in mind, thanks John.
Thoughts on something guys. A while back, there was a thread started called the "Pay it Forward Thread." Basically the concept was simple. You post any extra parts you'd be willing to part with for free. First one to speak claims them but they must also give something away. Went on for quite a while.
Over the last year or so I've acquired quite a few parts... many of which I don't need. And I know shipping from the states can be murder particularly with the state of the dollar right now.
Just gauging an interest in a CANADIAN PAY IT FORWARD Thread. Canadian's hooking up other Canadian's with free parts.
Thoughts?
Pics of ACDC Pro for sale, as promised...
Hit me up if you have any other questions.
Cheers,
Greg
Hi,
I have a Stern Flight 2000 that I picked up and not working, I hope to start working on it soon but was wondering before I got started and spending money on it if anyone has played this game or have any comments on it?
Thanks
Quoted from ValleyGuy:Hi,
I have a Stern Flight 2000 that I picked up and not working, I hope to start working on it soon but was wondering before I got started and spending money on it if anyone has played this game or have any comments on it?
Thanks
I love that game, super hard to achive multiball. Definently worth fixing IMO.
Quoted from Triumvirat73:Pics of ACDC Pro for sale, as promised...
Hit me up if you have any other questions.
Cheers,
GregACDC-PRO_01.png (Click image to enlarge)
ACDC-PRO_02.png (Click image to enlarge)
ACDC-PRO_03.png (Click image to enlarge)
ACDC-PRO_04.png (Click image to enlarge)
ACDC-PRO_05.png (Click image to enlarge)
ACDC-PRO_06.png (Click image to enlarge)
ACDC-PRO_07.png (Click image to enlarge)
ACDC-PRO_08.png (Click image to enlarge)
ACDC-PRO_09.png (Click image to enlarge)
ACDC-PRO_010.png (Click image to enlarge)
ACDC-PRO_011.png (Click image to enlarge)
ACDC-PRO_012.png (Click image to enlarge)
This is Pinside, shooter lane pics are manditory!
Quoted from schwarz:I'd be down, I have some stuff I don't need.
Most of my machines are in horrendous condition so i need stuff.... haha.
Thanks for the comments, SS is new to me, I currently have 3 EM's and a Lethal Enforcers arcade(for sale) Looking at F2K the rectifier board looks like it was gone over, lots of burn areas, bad solder joints, I think I am going to need a new board, anyone know the best place to get one?
Quoted from ValleyGuy:Thanks for the comments, SS is new to me, I currently have 3 EM's and a Lethal Enforcers arcade(for sale) Looking at F2K the rectifier board looks like it was gone over, lots of burn areas, bad solder joints, I think I am going to need a new board, anyone know the best place to get one?
a lot of people use Rottendog
http://rottendog.us/bps018.html
note the disclaimer mentioned by the folks at Rottendog below!
Note: Please Read
This is the most difficult circuit board I have ever had the "pleasure" to replace. The procedure involves desoldering from the old board and then resoldering the wires onto the new board! You need to take extreme care to track which-wire-goes-where.
Click on the link for pinwiki listing of wire colors xref to board holes http://www.pinwiki.com/wiki/index.php?title=File:Stern-ta100-16b-6.png
I DO NOT recommend that any but the most advanced repair technician try to use this board!
Quoted from ValleyGuy:Hi,
I have a Stern Flight 2000 that I picked up and not working, I hope to start working on it soon but was wondering before I got started and spending money on it if anyone has played this game or have any comments on it?
Thanks
No, it's terrible. You should just sell it to me.
I have a Tales From the Crypt FT/FS (SOLD).
Pictures can be found here:
http://goo.gl/RKDYYp
Looking for a Stern High Roller Casino. Want to play one before buying, but if I like it, will consider it then and there.
let me know whats out there.
My friend just listed his TOTAN and SWE1 for sale yesterday. Here are the details and pics for those who might be interested the pins are located in Ontario and shipping won't be an issue if you are out of province.
TOTAN
http://pinballrevolution.com/threads/totan.3224/
SWE1
http://pinballrevolution.com/threads/star-wars-episode-1.3225/
Hey mike , know of any getaways for sale out that way ? I'm still keeping my ears and eyes open for one .
Selling my PQ Twilight Zone. $6800 CDN roughly $5250 US
https://pinside.com/pinball/forum/topic/for-sale-twilight-zone-bally-1993-1994
http://www.pinballrevolution.com/threads/tz-twilight-zone-6800.3229/
I'm looking for a Fish Tales or a Bram Stoker's Dracula, does anyone have one they'd be willing to part with?
Quoted from shaub:I'm looking for a Fish Tales or a Bram Stoker's Dracula, does anyone have one they'd be willing to part with?
I am also looking for a BSD and a FT, but I will pay double what Shaub is willing to pay.
Hey Western Canadian folk. Anyone have contact info for Jordan Hudson in Vancouver? PM me if so. Super nice guy and good player! I have some pin buying questions for him.
thx
Quoted from leaffan67:Hey Western Canadian folk. Anyone have contact info for Jordan Hudson in Vancouver? PM me if so. Super nice guy and good player! I have some pin buying questions for him.
thx
He is on facebook.
I see him post on the "Quest for the GC: Pinball in Vancouver" page.
Quoted from toasterman04:I too ( or three) am looking for a BSD and a FT, But I can never find one
Don't worry I was just messing with Shaub. I won't be poaching any machines from you guys. I can't afford anything right now.
Quoted from leaffan67:Hey Western Canadian folk. Anyone have contact info for Jordan Hudson in Vancouver? PM me if so. Super nice guy and good player! I have some pin buying questions for him.
thx
He plays in the two bar leagues in Vancouver. Occasionally in the vrpa as well. Don't have contact info but I could forward yours if you like through a mutual friend.
Quoted from Gorno:I am also looking for a BSD and a FT, but I will pay double what Shaub is willing to pay.
Quoted from toasterman04:I too ( or three) am looking for a BSD and a FT, But I can never find one
Damn you both!
Quoted from freezie:I'm not looking for a BSD
I was looking for someone who was NOT looking for a BSD. I can cross that off my list
I mean, I would LIKE one, but I'm not looking for one...and if I were to find one, it would be pretty awesome if it was a cc'd pf....just saying...
Quoted from freezie:I'm not looking for a BSD
You should buy this one lol
ebay.com link: ONE OF A KIND CUSTOM BRAM STOKERS DRACULA PINBALL IN A REAL CASKET
seriously though, wasnt there one on maaca a week ago?
Quoted from libtech:You should buy this one lol
ebay.com link » One Of A Kind Custom Bram Stokers Dracula Pinball In A Real Casket
seriously though, wasnt there one on maaca a week ago?
That must be a bitch to nudge.
Quoted from Gorno:Don't worry I was just messing with Shaub. I won't be poaching any machines from you guys. I can't afford anything right now.
Lol me too... Just met him ... Good guy!!
Have the following screens for sale. Excuse my cell phone pictures
Would entertain shipping in Canada but would prefer local or at least alberta first.
Since the exchange is balls right now, figure I'll let these go for $125 CAD + shipping. They are built for F-14 and DE - Time Machine (as says on the boards) but they fit other Sys 11's fine too.
Will reduce the price if you have a NUMERIC 7 digit plasma display you can trade in kind. Will desolder from board if needed.
Here is his original thread: https://pinside.com/pinball/forum/topic/fs-system-11a-led-display-sets-125
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/anybody-in-canada-have-any-pins-they-want-to-sell/page/37 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.