This is my first pinside post. I'm newer to the pin community and bought my first pin about a month ago (Last Action Hero). Anyway, one of the first things I wanted to do is upgrade to LEDs and a lot of places pointed me to cointaker.com for LED kits. Got it today and about 75% installed. There was a nice little packet that came with the lights that said where everything should go and which bulbs to use...however we noticed very quickly that a lot of it was wrong. For example the RIPPER lights on the bottom left below the playfield which are clearly 6 yellows would call for 3 different colors in their manual. The mode shots colors were all wrong as well. We just ignored their instructions and installed them as we knew they should be and the bulb count seemed to come out right at least. But, has anybody else had this kind of issue with LED kits from cointaker or is my machine kind of an outlier? Everything else about my order from them I was very happy with. Would love to hear about your experiences. Thanks!