Galesburg, MI
Quoted from Bryan_Kelly:[quoted image]I've sourced the thin wall clear tubing you find in so many games and am offering up four different sizes.
The smallest size is used on pop bumper lamp leads in WPC and WPC-95 games and is also used to cover diodes when those lamps are controlled.
The medium size would be used as short protection when soldering wires to coil terminals, switch terminals and the like. You find this used commonly on drop target banks in classic Bally games like EBD.
The large size would be used to cover the bare ground wire that runs from the head to the cabinet in WPC-95 games. Also used to protect the shooter lane wires in WPC games.
The X-large size is what you need to cover the power wire harness in WPC-95 games. It's in the bottom cabinet and runs on the right side from the power box to the transformer in the back. (Pic coming soon)
I'm sure other uses can be found for all the sizes.
You no longer have to use the thick walled condensation tubing found at the big box stores.
Price is by the foot.
Small - $.60
Medium - $.80
Large - $1.20
X-Large - $3.50
Shipping is a flat $5.00, unless you order a shit load. Then it's $10.00. I'll let you know when you have a shit load.
Worst part of the whole deal is.....you need to pay by check. That's right....Steve young style. Send me a PM with what you want and I'll send you a total. Once I receive the check, I'll send the tubing. Sorry, no Paypal, Venmo, etc.. If Uncle Sam decides he wants his 30%, there goes my profit.
[quoted image][quoted image][quoted image][quoted image][quoted image]
[quoted image]
I also only accept checks, unless they are outside the country. There is about 10% of people who cant either figure it out or deal with it, I am not sure. Anyway it always reminds me of doing biz with steve for so long.
