Documenting my next swap which will be similar to the Taxi I had done for the same gentleman. This one is in far better shape but is in desperate need of some love.

It will be getting a new playfield with my usual rebuild, clean and/or replacements with new plastics, targets, switches, ramp and chrome. The cabinet needs some work and will be getting Radcals. It will get chrome trim all around as well. A new DumbAss WPC driver board will also be going in.

Here’s the as delivered starting point.

C142F39C-6500-4422-9F13-8AC6C0571027 (resized).jpeg

7F34E39B-001C-40DB-A5F1-072717ED63FF (resized).jpeg

982946CD-703B-4A23-9DB3-CE0B40CB64F3 (resized).jpeg

CF2C8B72-FEAF-41EF-AA67-0ABFD0F42606 (resized).jpeg

99627C26-7684-4C6C-B0A9-4036D06157D0 (resized).jpeg

B9C92E89-597F-471D-A91E-770824A36908 (resized).jpeg

DCECEB5A-DED3-4D23-8489-781B23CF40F8 (resized).jpeg

6786E03A-DD35-43F6-928D-D7783D71389E (resized).jpeg

Playfield is on the rotisserie. She’s due for a cleaning.

422AC37A-B200-4FA5-8BEF-306D322406BC (resized).jpeg

935C16A0-95F3-4D3E-AEF7-DD95CED9B96B (resized).jpeg

662AD239-70C1-44FA-9920-F5374659BDDE (resized).jpeg

It is getting all chrome trimmings courtesy of sc93cobra !

A mirrored back glass and color DMD as well.

Top is almost torn down.

93926B7A-B1EF-4213-B605-8D8EA8E994ED (resized).jpeg

2958BF8D-3692-4EAB-97BA-0414CBF010C1 (resized).jpeg

EB090350-7A5F-4F8A-9875-483B5B92F69E (resized).jpeg

222875F6-BA64-4BB9-A5D6-CEF15B091D6C (resized).jpeg

F69B4C0D-4242-4201-9888-36E9A7C2B442 (resized).jpeg

C28A6E76-A5CE-4F50-9E61-A160EF17D576 (resized).jpeg

0D3AFEC0-347F-4012-B8EE-0738FA0DA863 (resized).jpeg

3A8C6A57-69CF-496D-B120-C6E566061DA1 (resized).jpeg

Despite the icy morning, I was able to get a lot accomplished. The cabinet is stripped down. It’s really a decent machine other than dirty. The speaker maybe needs replaced?

The back box top came off after I took all the angle brackets out lol. My buddy Grant is taking it Sunday so he can make it nice.

E0AA9A95-6E36-41A8-8BD6-C9CF5229C712 (resized).jpeg

37728134-A7D5-423F-97A8-89CCEB5DACF9 (resized).jpeg

CA1F91F2-957E-4293-9BF9-AECEF6392611 (resized).jpeg

F816C170-99D9-4BD1-BFB0-8F01E12AB286 (resized).jpeg

11B6EC42-51FB-471A-833E-877F44FE46FF (resized).jpeg

386245BE-1D5E-49D3-89B2-7F8093E73DA0 (resized).jpeg

Have a local powder coater that did a hitch receiver for me. Came out great. It was rusty despite the rain in the picture making it look better.

So I’ll be able to get that done locally now too for pinball parts. He had some there that just got done.

4DA276F9-55E7-4D28-81E3-982110272818 (resized).jpeg

149C61D7-3BB4-4210-BE23-A499238FDA3B (resized).jpeg

4B6A2F3A-1282-4059-9026-9ED9881C593A (resized).jpeg

CC9739A3-1ED0-458F-814B-0769BB40D68D (resized).jpeg

1B4824FC-6BE0-4BDD-9F18-D8D8B6F9A392 (resized).jpeg

38F7055B-BCEE-43B2-B2C3-E5BFE7191C32 (resized).jpeg

31630B68-0F46-4D87-8C81-EE2492E47484 (resized).jpeg

195C463A-63D9-4B3D-BC30-905A79C82753 (resized).jpeg

3FD401ED-2A8B-4339-B3E6-1DC9FAF614A9 (resized).jpeg

CFBB2CFD-FBEF-459B-B8AC-14555FCCDCFC (resized).jpeg

Playfield is completely stripped down.

11C0F849-5362-4463-BFC4-9CF9AE5FB214 (resized).jpeg

9CB4427D-E9C4-45B7-B4BB-4C977396EE8D (resized).jpeg

2BB5B32C-44B7-4B76-9F7C-73278F6C16E9 (resized).jpeg

F5E7911B-6F0B-4428-8BB2-0CCEC228C976 (resized).jpeg

Mechanisms torn apart for cleaning. The pop bumpers will get all correct coils.

The ball shooter feeder was pretty rough so it’s getting a lot of new parts. Same for the slings…

3C3AB53E-6438-477E-B092-02F98C21C794 (resized).jpeg514B9495-6AD7-4C59-8A6A-EC12EEFECFA3 (resized).jpeg5954A618-D667-49F9-B66E-1AD0AB708F47 (resized).jpeg5C541317-665F-46EE-A0EC-9169354774AD (resized).jpeg6F885B6D-A58C-4AA8-BB46-45814E92F94B (resized).jpeg6FA78658-55D8-4282-A34C-06275760DF5A (resized).jpeg730A62BE-BA7C-410C-A020-11BB29371EA4 (resized).jpeg9E0FF3F8-D4E5-4025-A3E7-E4581C7C0552 (resized).jpegB659E825-4857-46AA-B65E-BB96B70388F9 (resized).jpegBC8BB3A1-DFAE-4C1F-9172-9F44DC852627 (resized).jpegD30A151D-5A48-4EF4-95A3-EDBF0C511C96 (resized).jpegEFCA5100-239D-4F85-9D53-AC97DAFE4BB3 (resized).jpeg

Some parts are trickling in! Thankfully the most important one has so I have no excuses.

2C0FBEB3-6D8A-400C-B965-6349F9CA6C44 (resized).jpeg

Playfield has some parts installed.

Using Zitt clear bodies again to brighten them up. He has an opaque clear and lots of other colors to fit the theme or style. I really like them and this is not sponsored lol. At some point when I do some deep shop jobs on my own machines, I’ll be converting to them.

26F96DA5-FEC4-4B9B-AADD-C30AF9759EE5 (resized).jpeg

CF4D5D01-4386-446F-B5E2-B0FD522F8618 (resized).jpeg

B297140B-C7B6-44DE-A74D-1C959E6C914E (resized).jpeg

Tumbled hardware ready to go.

I miss The Office and Michael Scott.

187A5A15-8FC2-4F1F-B184-397CA6ED0767 (resized).jpeg

D4D093B7-A496-4138-8C67-96832A8D9D37 (resized).jpeg

Today was another day with a bunch of orders coming in. The highlight was these DumbAss boards. Beautiful!

E9D4A493-93F1-4A99-B86A-A5908C0D88DF (resized).jpeg

Ramp flaps and scoops installed.

6DB45496-A6D8-4AD0-93ED-B0F2915B4340 (resized).jpeg

DE951830-F053-4F79-8990-4954F3F16D36 (resized).jpeg

62799EEB-AEA4-452C-98AE-2FD68E4002A9 (resized).jpeg

56B05C92-B4DC-4DE3-B5AD-A242FAF6E32F (resized).jpeg

6499A8E3-0091-4CC2-B207-412AE37ED8D9 (resized).jpeg

7D51E578-6D20-41E3-AE47-F388692481B5 (resized).jpeg

83E0A5C0-35D6-4738-8A32-C4B85CE35898 (resized).jpeg

2541C8A9-C1E6-40F6-BFCF-3D9BB7C57097 (resized).jpeg

The bottom with lighting harness and boards in.

5271CD3D-D557-465A-9AD6-1BAA91E10B45 (resized).jpeg

Top side coming together. GI is Comet sunlights. All rings are Titans.

58AC20E0-3502-4AB8-8FF6-C9D8A2958499 (resized).jpeg

EE9210E4-BB3A-4976-8E49-4A46B546B1D7 (resized).jpeg

1D5A05DD-9F2C-43BA-A949-702381C206F5 (resized).jpeg

B7FCC71C-4DCA-4DA7-8BB4-171238AAE1FC (resized).jpeg

She was checking that the harness was cleaned up. I’ll get her opinion on the progress of it later.

2520AA40-8D0B-42E1-8E41-E610F48B6E83 (resized).jpeg

Well Karolina approves of the work so far. I taught her how to fist bump with her head. So Thing qualified so she considered Thing worthy too lol!

Not much to share tonight as I had a blow out that want from Taco Thursday. Gotta love PA potholes. So threw my 3 season wheels back on and got tied up with that. Very glad I have a full size spare and no issues changing it out right before getting on route 30 in Lancaster.

A7A7FE6A-C8A5-47CC-9A6F-6298F5F74FB3 (resized).jpeg03F32429-3B67-4819-967C-0B0291BAAEA8 (resized).jpeg41C0A865-5CA1-4457-8B9F-EFA0FB9595CC (resized).jpegA24F188D-8815-4FF9-85DF-5EDBE9E87B12 (resized).jpeg

Added the swamp accelerator tonight. Ramp is being upgraded.

99E43C28-EC29-40E9-B051-3CAC4CE1D52B (resized).jpeg9415C8CC-F318-4163-8A64-F948EBCD4EE1 (resized).jpegAC4BD800-788C-4344-8630-DE9067AC1F8E (resized).jpeg0DED78ED-A9EB-46DE-9681-70C6B164142C (resized).jpeg0F036DAD-B06E-4C3A-828D-65F330230A2F (resized).jpeg3D4FFF29-8B62-4DB1-A238-BC0654C98176 (resized).jpeg42CCE243-333F-4348-8168-2426942D5277 (resized).jpeg763CD386-73A1-48CC-99B5-D808AFB6518B (resized).jpegA91F296E-278A-4A73-BF44-87EC2F6ABD3F (resized).jpegAB5AEAF5-2543-40B2-9180-FD20A4626649 (resized).jpegBC170701-362E-4723-AA5D-6480684247F7 (resized).jpegC41A6012-9B75-4A33-A5D5-25FD776474A6 (resized).jpegD3BA84E9-A259-474D-B4E9-A243260440FC (resized).jpeg

Underside progress and difference unlit between the mirrored translite and regular.

1DF3C10F-2CE7-423F-9570-96DC186A72D0 (resized).jpeg

ACFFAA22-A25A-48B8-B324-403EA726D1CE (resized).jpeg

The entire cabinet will be getting chrome and it just showed up today. Hot Rod Arcade always comes through. We also went with the chrome wireforms. This one is getting pimped out.

I swapped over the parts on the ramp tonight. Added the switch cover as it feel it looks cleaner.

FF0E2136-8F78-428A-8CF1-671A39A57DA2 (resized).jpeg1934BE1B-1A5E-49D9-AEE4-402AC240983C (resized).jpegB098E092-E355-45DB-9E7C-ACA0458679AD (resized).jpeg81A8E6BC-1B66-4F41-B7A1-DFDD57301C71 (resized).jpeg07722278-25F5-44F5-8ECD-0241B376C507 (resized).jpeg

Started on the new plastic ramp from Starship. The new clear plastic will look much better than the yellow on a new clear ramp. I added new diodes and tubing for the lamp holders.

I have most of the mechs in. I’m waiting on a few new coils to replace ones that had broken tabs.

I laid in the solenoid harness but not much done other than plugging in a few connectors. But moving along well…

5DA42EAF-D18B-4F51-97F8-E6FEEAC9F3F3 (resized).jpeg6908F80E-36B1-4023-A66E-436D7A4C3886 (resized).jpegB9466281-F237-4121-B89A-463B7F1CF96A (resized).jpeg

3CCC6D2C-FF68-4A70-A2A7-115CA1B12F96 (resized).jpeg

Here’s some of the chrome cabinet trim.

3C54F018-EC08-4B92-A2BB-B10EFAED0A6C (resized).jpeg5A5C0B11-9AA4-4BE5-B580-DD6FEEF06CC3 (resized).jpeg

C20085AF-3319-4AA2-BE4D-F1B08492062D (resized).jpeg

997A9B02-A6EB-4A86-8F81-F326C752A794 (resized).jpeg

Wire forms are regrained and installed.

392F0D77-FBA8-4AB6-89F2-691E1120189D (resized).jpeg

F5CF5950-489F-4864-AF90-D7F5402CC2F4 (resized).jpeg

5FCC8B20-3E1C-47F8-AA81-26CD04B98E90 (resized).jpeg

DBF1B209-876C-4D6E-B84E-5E7E7586380F (resized).jpeg

Thing is assembled after I replaced the crimp connection.

Bookcase is back together too and installed. Thing has to wait close until the end when it’s off the rotisserie.

307AF903-1EA1-4022-B184-7B5D07F37F29 (resized).jpeg360FD984-31E3-4639-B4DC-FBED7D4EE4FA (resized).jpeg5589D808-01E0-4106-9624-49F846FBAF08 (resized).jpegB43DDF36-93E7-4110-98E2-5F995F18614B (resized).jpeg9DD09F83-696C-49D8-8CA5-6C7446EB5194 (resized).jpeg

Let’s guess what’s wrong.

D4559843-DC22-4592-9910-8A80D867AA0B (resized).jpeg

7DAE099E-D3AF-4C38-85D1-5FAFA62400A6 (resized).jpeg

A6C46875-AA7E-4734-8607-77BB79F48911 (resized).jpeg

Tonight was ramp assembly, Thing decal and back panel night.

6816810C-4096-48F1-A352-CBB3DB55FB45 (resized).jpeg

6D6EBFD0-4367-4265-AF40-20D0689E92E3 (resized).jpeg

Theee are the cabinet decals that will go with the back panel decal.

6FC264FF-6246-4EA2-A400-11519558FD85 (resized).jpeg

Karolina is about done for the night. With the rolling, she is happy with the progress.

08012E03-51BA-4637-B9A7-64355B459C64 (resized).jpeg

55E199EC-EE84-4376-A673-CA0B02A366D1 (resized).jpeg

The ColorDMD is installed. I used my own machine to load the firmware and confirm all is good.

Two standoffs were broken so installed new ones.

CBBE3836-64DA-41CC-BF11-380ED5CAA7CC (resized).jpeg

C17419FA-4314-4862-8556-FD04645AC697 (resized).jpeg

536AB230-8436-4F60-9FF7-308B50EA35DE (resized).jpeg

Plastics are done. Green LED’s will be added into the swamp plastics and spotlights at the slings. The last one I did really lit the slings up in the middle nicely and the owner wants them.

I had 3 wedge lamp holders that were busted like this so they got replaced.

23C278F2-ECE5-4238-BB45-C9081F1846EB (resized).jpeg

58496A26-0098-4CAE-BBD2-3F364EC41E98 (resized).jpeg

Adding a few reinforced targets. They (PL) also now have the Stern reinforced with anti sway. This his perfect for the upper swap target.

D4F04EFF-09DD-44CC-83EF-D66BCB0F5BE6 (resized).jpeg

11ED2215-ED92-490F-AE5A-7EF0431E0EEA (resized).jpeg

5743B4F3-D2D4-439D-939A-6335B2A9EACB (resized).jpeg

Outhole kicker in and starting on switches with new ones being installed. New clear tubing for obvious reasons.

This is the oblong blue target by the bear kick ramp. Well it should be. And it was custom lol.

A449E1E7-D9F9-425C-9005-3D0C73E188B8 (resized).jpeg

22105D3A-2C11-4223-86E7-05CDBE2016CF (resized).jpeg

E0498309-2475-48CA-8D1A-B9E12A6219C1 (resized).jpeg

Ramp was fitted and Mylar at ramp flaps. I added the bear rug toy and switch covers.

018C5234-8FE9-4012-AFE8-EC8A937A1591 (resized).jpeg

I have all new switches and optos in. More pop bumper spoons are much better. One was cracked! Not sure if it shows in the pictures.

I’m about 85% complete. Everything is soldered in less pop bumper lighting and sling spotlights (in route).

B9711720-37EB-4ED6-A56C-64E596A9A44A (resized).jpeg

5512B69B-0272-4A45-AD8E-B2C9C61E96CF (resized).jpeg

0504B118-51B0-4EE5-92A8-4B4564C44FBF (resized).jpeg

Lower flippers were installed and soldered in.

Progress as of today…

D69790DD-82ED-42E4-8ECD-BFE79C160AEB (resized).jpeg

DEE9F82F-2F5F-4DCE-834F-F70CE62FE9A2 (resized).jpeg

2457CC4C-2F41-4C69-ACF2-79D5066B5BA3 (resized).jpeg

Thanks! It helps me to keep moving daily or almost daily (wife’s birthday was Friday). And either I order parts and order ahead or people supply them. And having spare new parts on hand too. And lastly having this title and have done several of them!

My buddy Grant has the cabinet cleaning up nicely. Should be ready by next weekend.

348DB973-189D-48DB-AB8A-AEF0FD14F3E8 (resized).jpeg

34B7B82D-19AF-469E-B003-C6E06CC22D8B (resized).jpeg

3F8A29F1-91F6-49E4-9371-16BAE09E4C99 (resized).jpeg

B01433DD-9923-4F90-8CDA-8D68A6E6D83D (resized).jpeg

C6476EDE-0DB5-47DD-A4DC-25E8BC780821 (resized).jpeg

D0D6C1B0-C35A-479D-AEFE-2F250849E68B (resized).jpeg

GI tested and working great. Owner wanted the green swamp lights.

A small taste of the chrome.

83D4A0CF-C723-427B-9C30-3D9C8D3F37AC (resized).jpeg6D606884-835C-48D4-8083-934D156B0B37 (resized).jpeg37CF1DF6-40C3-4186-BE9B-5E9CFE50E04F (resized).jpeg

FAA46F96-586E-4468-BBC8-F50005EAD2C1.jpeg

F6E15C29-A95D-41DF-B1A1-3320A2339006.jpeg

4BAEFC24-560C-425A-8525-E190829DCA49.jpeg

85E1C8E9-5C52-4DE1-B3D3-00D7495948FF.jpeg

Karolina is done working on it for the day.

7844B2E8-BEBE-4D9D-B57E-71E095E3BE86 (resized).jpeg

2EEB5A01-E89B-4287-B09A-6B38A8F0D9C3 (resized).jpeg

8541EBED-7696-4198-BC7F-E309861E5DA8 (resized).jpeg

Inserts are all good too!

4CDB685E-70BA-4E4D-89D6-5EF12BEC7045 (resized).jpeg

73663B96-17EB-4BDF-A49C-D73D373D959F (resized).jpeg

CA6ABF62-9A6C-4D95-A458-BD536F8D1C43 (resized).jpeg

E0883091-539A-4985-8DD1-4F4D46DF9B67 (resized).jpeg

7AC1CADE-7572-4D91-AC69-D2FC926E12BC (resized).jpeg

191661C0-5D10-423E-9B4B-EC788247FC3E (resized).jpeg

D654FA69-C9AB-4CFF-ADF3-AEEFD9E073B0 (resized).jpeg

FFD036E6-2392-489D-9C77-F2BB63CC3B26 (resized).jpeg

7566E3AF-6492-4CFA-A6F5-371E1102864F (resized).jpeg

Last picture of the night. Getting the stink eye.

3B8AC0C0-1CDA-4281-A1AD-7581A8F4D612 (resized).jpeg

59DF7B81-C0DB-4798-8471-728EC30FFD64 (resized).jpeg

Installed the star post and sling spotlights.

0E62D4A8-7304-401B-9BA4-0401FFE19628 (resized).jpeg

1A89FAF2-713A-4180-963A-0912403D8DF7 (resized).jpeg

1C6A7D5B-8FFE-47D0-82D7-822928B44AF4 (resized).jpeg

478D1194-7B96-4408-B1F9-991913831E80 (resized).jpeg

5FF9CBAC-3777-470D-BF47-DF6CBB6BD0EB (resized).jpeg

9D9EF8EB-BE48-4592-AA1E-24A0343361AA (resized).jpeg

F9F6F17B-2C10-4AC6-A5ED-1AF1BC19F477 (resized).jpeg

Couple of teases of the chrome from Chris at Hot Rod Arcade.

180F7301-CF07-47B4-9BDB-DC18907A8A7A (resized).jpeg

2D9842BA-DB60-4CA8-935D-066E6A23E518 (resized).jpeg

A0FDBD47-5042-441A-A184-11A34773DAB2 (resized).jpeg

Good news! We’re off the rotisserie.

36DB897C-9F3C-48F7-A061-002057D18395 (resized).jpeg

4F8B41C9-A2A4-4E7C-8D3F-95B5F85E8C4D (resized).jpeg

The supervisor is resting after this one. She still has to dress up the cabinet.

I have no idea why she likes to load over the pipe.

86025C98-E06A-41E4-AB4D-3CB2409E566D (resized).jpeg

I know! I can’t wait to see it all installed.

Light panel redone with new label.

97C22F6E-632F-4F6C-9FE4-5A5F7D593D2D (resized).jpeg

490D07F1-0728-4A1A-8B0E-F3C9A471D38B (resized).jpeg

Remembered to check the transistors for the magnet board… yep the one TIP 36C needed replaced. Installed new ones I have from GPE and more gooder now.

164C2E68-9AAB-40E1-AB93-38A8692AEACF (resized).jpeg

BF5B8F46-41B1-45F6-8B22-1825C60CB3A6 (resized).jpeg

C79105DC-9B9E-4130-A806-DD9A74CDDD3A (resized).jpeg

0017D725-F3C5-40DC-9199-6B0F04A07E37 (resized).jpeg

99F5D646-C095-470B-AECC-F0B685D56B9A (resized).jpeg

947CA818-3F05-4881-9D05-AA28048FE8F1 (resized).jpeg

2DFD589A-42E9-4D12-828B-D8D23A28B85A (resized).jpeg

Last coil I needed is in for the diverter. Subway shipped and should have early next week so I can say it’s fully complete.

And good news as my buddy Grant has the cabinet ready this weekend. Things will get very chrome next week.

BC88E910-7997-4E3C-955E-9A17D041F8BE (resized).jpeg

No I just cleaned and repainted it.

The back ordered subway came so installed with a new switch.

C356C3E3-E676-4AAF-B3A9-6A573704FDF4 (resized).jpeg

The cabinet isn’t ready yet so I’m doing what I can. New ribbon cables too.

06D9D976-E143-4601-BD67-6D5079130146 (resized).jpeg

Playfield final quality control: check!

13DB063A-BEF4-4E0D-9ADA-C48B24681FD1 (resized).jpeg

330F303D-7BB3-4DB4-832A-CD84DDA7124E (resized).jpeg

FF4531FE-9433-4D36-B29B-88A7447A4FDE (resized).jpeg

Not much to update other than cabinet will be ready Friday. He has some things he wanted to fix.

580763B2-CBC7-4267-BAE9-9F41221A5AF7 (resized).jpeg

8F6B5C8E-3048-46E8-AA7F-6363B283013C (resized).jpeg

F69B91E3-778C-4533-BBA5-15BD5D8FA759 (resized).jpeg

Cabinet is back.

D95C7CD7-0D31-4460-A0F5-1CDCD06F6AE5 (resized).jpeg

Progress…

2252A730-A76A-48DC-A3F6-199F5839F657 (resized).jpeg

254688EC-0AD0-4BAB-9EA2-873E40DC7B72 (resized).jpeg

3A639553-F966-41AE-89C6-4B96B63FB504 (resized).jpeg

65E7608E-6820-430B-84AD-59FD820F3E9B (resized).jpeg

Cabinet is about wrapped up now. Just have to get the playfield in.

43EA440E-E351-40C2-9F94-EA11F7B50625 (resized).jpeg

05F6DE50-AEEF-4400-9350-9844D27460CA (resized).jpeg

40AC7994-E4F1-46F0-9308-D61647A29297 (resized).jpeg

D564CA06-5F87-40E1-8A77-071029B602A1 (resized).jpeg

34C7B3C8-59D2-41BF-9BD6-84F8C69E39D3 (resized).jpeg

E9C69D2C-B31B-440A-A57B-8A5FB44D2303 (resized).jpeg

Playfield is in place.

8AE5653F-2DF4-4653-BED0-CE950FFE8403 (resized).jpeg

7D66CE88-52D7-4C45-883C-4E4EF3E34148 (resized).jpeg

7F26B930-9154-4B4D-82FB-38839B14E567 (resized).jpeg

6B5C807F-2054-43C6-90DF-BC532C1E563F (resized).jpeg

6AFDB5A5-E158-48DB-A6F8-0419909240B4 (resized).jpeg

4029503B-63E7-416D-B40A-35002A273ACC (resized).jpeg

A57FFA46-743D-4B05-A37D-A7A34F552011 (resized).jpeg

Yes it is going on route.

Good news! We are looking good. GI and insert lights are all working. I have one ramp flasher and some switches to address. All bookcase optos are out so I have some work to do.

FB53E12C-B619-48F8-AEBD-BCC5C67829B9 (resized).jpeg

The boss is tired from working on it. She was able to adjust all the switches and fix issues. The bookcase optos were new “Gulf Pinball” opto boards. The RX board was bad. I keep getting garbage from Marco. Boards, plastics, etc. Disappointing…

But it is about done and playing great. The glass is now on so it’s about ready.

C6F70B4A-B279-43D5-9BA8-35F1C3827E4F (resized).jpeg

D21C0208-47C0-4AAA-94F7-849EF15ADA2A (resized).jpeg

F5004D71-CA30-406E-93EB-70066E8EF371 (resized).jpeg

I guess it depends on your end goal. Do they look similar, yes. They're relatively easy to install but you need to have the cabinet somewhat prepped or at least painted so any old graphic doesn't shine through. They look really nice but way too shiny and don't look like a factory cabinet. If you like that look they're great. Personally I prefer the real decals but I don't have the talent to install them to my standards. So they fit that bill or in this case on route. I'd consider doing them on my badly faded Getaway, but wouldn't on a higher end game IMHO.

Now it’s officially done. Going to play test it with gloves for the next week to shake it down. Want to make sure it’s good to go after a hundred or more plays.

085EA3D2-E0ED-43E2-86D6-E5B175C14A7A (resized).jpeg

It left Wednesday with a clean bill of health and new gloves. Waiting to hear from the owner when he gets back in town to play it.

If anyone is in Ocean City, Maryland, it’s at the Electric Quarter Arcade.

3FF383BF-49D7-4EA3-B0E7-1EE92F819D6F (resized).jpeg

C9960290-A073-4900-A6F8-39C528FED172 (resized).jpeg