My Amigo apron and shooter gauge were in rough shape, and reproduction artwork is not available. I scanned and traced the artwork on a PC to create BMP files, split into sections that I could overlay on each other. I had success making waterslide decals for the shooter gauge, but found that was not practical for the apron. It stretches and splits when the decal is too large. I uploaded the combined file to Kinkos and had it printed on vinyl for under $15. I was so pleased that I matched the shooter gauge in vinyl too. The parts were sanded, painted, and applied acrylic clearcoat before and after adding the vinyl. PM me if you would like the files. They are close to perfect; an artist could easily tune the individual images to make it exact.
.

20210112_214117 (resized).jpg

20210114_194759 (resized).jpg