America's Most Haunted
Spooky Pinball, 2014
Spooky
Zaccaria, 1987You're currently viewing posts by Pinsider CraigC.
Click here to go back to viewing the entire thread.
Quoted from jrobinso99:I used some clear glue to tack ours in and it has been held in place nicely since. If we need to pull it back out I'm sure we can, but I don't expect to have a need to do that any time soon.
Silicone works well for this type of stuff and should be easy to remove if you have to.
Quoted from Tsskinne:Anyone have suggestions for how to get the scoop to perform more reliable?
Edit:
Okay after a better search saw Herg's post. Has anyone else tried his solution? Feedback and results? Thanks, ours is on location and having some issues with not being able to reliably eject one ball without multiple attempts.
I swapped the coil out for a 26-1200 I believe. It is still random but doesn't break the flipper hold and trigger a re-flip.
My scoop fires every time but the delivery seems erratic. Originally the coil was so powerful that it would break the low power hold of the left flipper but dialing it back in the software resulted in SDTM drains.
I changed the coil down to a 23-1200 and the results were great with a nice soft delivery to the right flipper, but occasionally I still get a SDTM or a really weak dribble hitting the top of the sling.
Has the new scoop changed the consistency of the eject?
You're currently viewing posts by Pinsider CraigC.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/amh-club-a-spooky-start?tu=CraigC and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Elmhurst, IL
Maple Ridge, BC