Quoted from GoddTodd:However, the right flipper is missing the entire flipper housing. All I have left is the actual flipper. Other than that it's just 2 wires that dead end into nothing.
This kind of sucks because I'm going to go broke if I try to rebuild an entire flipper assembly from parts purchased at Flippers.com.
I would try if at all possible to upgrade both flippers to something like this:
https://www.pinballlife.com/index.php?p=product&id=172
Two of these might be more expensive than original replacement parts from flippers.com, but those 40 year old parts could be brittle. If they break again, you're right back up $hit creek. New flipper mechs would last basically forever in home use outside of dirt cheap parts like coil sleeves. I'm not sure if it's possible. You could ask in @vid1900's flipper upgrade thread:
https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers
Maybe you could even use something like old Bally SS flipper mechs. Should be cheap & plentiful.