I have one - I'll try to remember to take and post pictures when I get home (feel free to remind me - I can be forgetful at times.....).
(Topic ID: 265154)
You're currently viewing posts by Pinsider homegameroom.
Click here to go back to viewing the entire thread.
Here are a bunch of pics. The heavier duty (thicker) spring goes towards the coin door and hooks in to the farthest spindle on the catapult (you can see the e clip from the side). The smaller one hooks onto a different spindle. Try to see the location in the pics. Let me know if you have any questions.
Good luck with your bowler. I love mine!!
81A6F24D-D81B-49DD-87E9-BF8C1951F7FC (resized).jpegA6744111-7888-4C99-93A3-963FF19B117C (resized).jpegBCA291ED-7B5A-4017-916F-B71F6C8DE787 (resized).jpegC55125F0-8F31-4579-8D1D-C1A2D141E081 (resized).jpegF8F0B689-7EB7-417E-8A17-78B9DFEB5C5F (resized).jpegC09B017A-FB3F-4018-8080-E364662476BE (resized).jpegAll pictures were taken from the open coin door. And pardon the mess inside the machine - I do use the interior as a storage compartment for crap!
The springs attach at 2 different locations- it’s kind of hard to photograph.
The larger one attaches to the shaft that you can see on the side of the catapult (look at the 3rd picture to see it). The smaller one attaches to a shaft slightly forward of the other one; you cannot see it from the side, but you should be able to see it when you look straight down the catapult.
You can see where the rear spring attaches (well, you can see the top of the shaft) on the 5th picture.
Double check to see that your machine has the 2 shafts by looking down the catapult without the springs in it. The last picture sort of shows the attachment points.
You're currently viewing posts by Pinsider homegameroom.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
