none of the inserts light up on my WW. Which fuses do I check and if they are good where do I go from there? While Im at it, how do I check a fuse with a meter to make sure its good. I should know these things but I don't so go ahead and call me a idiot
Ran into this with my Funhouse...all controlled lights out.
Check your manual to see what fuse controls those lights.
To check the fuse, do a continuity test on the fuse with the meter. you can see how to do this on youtube.
Here is a link to my post on pinside regarding this issue:
http://pinside.com/pinball/forum/topic/lamp-matrix-is-completely-out-funhouse
Have you ever heard " its just a fuse" and it was? On the right side of the cab near the bottom there is a lone fuse which is a 8 amp regular fuse. It was bad. I replaced it and everything works fine. The manual is vague and hard to find things compared to a newer pin so I don't know if there IS a chart showing what fuse goes to what. But anyway I fixed it.
Thanks.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/all-inserts-lights-out-on-ww and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Humble, TX