Anyone have a refinery tesseract mod they want to sell?
You're currently viewing posts by Pinsider meegis.
Click here to go back to viewing the entire thread.
Quoted from 85vett:Speaking of the refinery tesseract mod. I've got a couple broken ones. I finally glued one back together and re-polished it up. Took my drill press to it and made the holes go all the way through. Recessed the end so the bolt sits flush as well. Now my screw goes all the way through and spreads the stress across the hole cube vs just the bottom corner. So far it's holding up great. Just a suggestion for those with a cube that may have broke on you. I seem to be one of the rare ones that has had that problem though.
A couple eh? Wanna fix another one and sell it?
Anyone here able to lend a hand?
https://pinside.com/pinball/forum/topic/help-with-avengers-missing-ramp-screw#post-2891052
Quoted from Grinder901:I'll take a few pictures for you this afternoon when I get home if no one else has done it by then man. No problem
More pics will confirm for me.
Thanks!
3 confirmations of the same screw and washers.
Looks like I have an answer. Now to find the damn screw. Lol
Quoted from violinfather:I want to buy one of these so badly! I had two pending deals locally however both sellers changed their minds. I guess they just like their games too much. Arghhh!
How bad?
Quoted from Grinder901:You gotta spring for a Colordmd
Canadians pay close to $700 for a cdmd.
Hard to justify it if I don't need it yet.
Quoted from libtech:Anyone know what the factory outlane settings are? are the posts in or empty holes?
One of the settings allows for a stuck ball on the right side. I can't get a pic right now, but will follow up later.
Stern provided an extra post for making the game more friendly with their update kot. Only needed if you want to lower the I post, as the gap is too big without adding it.
Quoted from apinballwiz:Is there a part number for this kit?
Call stern, give them your sn, they'll send the package
Quoted from blowback1976:I did, and was told to go through a distributor and pay for it.
Weird.
Quoted from libtech:Ok that would make sense, lower hole on both sides?
Mines never been in the lower hole. So not factory to me. (Game was purchased nib by previous owner)
Quoted from libtech:Good so I'm not just a wuss lol, should be common knowledge, I'll have to try your settings, but I cant believe how much more fun this game is.
AOTH is such a good mode, and as its a mini wizard mode, you should be able to reach it if your having a good game, not make it impossible. BFE should be very hard to get to though still.
Wuss mode for libtech.
Quoted from libtech:Like you haven't turned any down
Factory settings on mine actually
Quoted from J85M:Are there less Blue Avengers LEs out there than Green Hulk LEs?
I believe both are numbered to 250 units
Quoted from matt_assassin:I have a question about the shaker. My lucky friend just bought an Hulk #011 and the shaker seems like very weak on gameplay. I checked in the service menu for running it manually, and everything is good. Strong and you feel it good.
The setting is on high and no parts are issue on it. Is it the code of the machine set up like this ? I have an Xmen and IM, both are strong with the their shaker. When he starts Hulk Multiball, the shaker is slow to start and seems low...
Thanks !
That's odd. Mine feels nice and strong when playint
Quoted from J85M:Thanks just don’t see the blue avengers le often saw one today and it totally reminded me it excisted and how nice it is.
Rare would be the white "premium"
Not many exist as far as I know.
Quoted from J85M:Anyone know of any Blue or Hulk Avengers LEs out there still NIB?
Yes. Maybe....
I believe cointaker had one still nib. Might be able to track it down if you give them a call.
Quoted from dsmoke1986:Just joined the club...Loving this game so far. Have color DMD and just ordered SideBlades.
What are the other must have mods??
Pro or le?
Some things are different so mods make changes.
I really like the upgraded tesseract.
Quoted from mmuglia:It was fun while it lasted, but I sold mine. Great game! It lasted about 2.5 years in a collection of 5-6 games. I wasn't sure it would last that long.[quoted image]
Your lineup looks like mine used to... (Bdk was to the right of iron Man in this pic)
IMG_20180617_133215_1 (resized).jpgQuoted from 85vett:That's diffidently not a common failure point. The wire breaking to the coil is but not the bracket itself breaking. Had my game for nearly 6 years before selling it and never saw anything like that from my game and I think I've only heard of a handful breaking across the forums I'm a member of.
Mine snapped almost identical to the above pic. I bought a new one from Stern through a distro and it was much thicker and made of what seemed to be better quality metal.
Quoted from Meegis:By chance does anyone have a spare avengers key fob?
Pic attached. [quoted image]
Anyone?
Quoted from rollinover:Mine came in the factory bag with it.
One you dial this game in the game is amazing and hard
Love it
I'm looking for a spare. Someone who is willing to part with one.
Don't have the game anymore.
Quoted from Pinless:Just triple checked to make sure I didn’t overlook them, and they’re not there.
I’ll just replace the locks with some that are keyed alike.
Thanks!
It's possible that they fell into the cabinet in transit, I would lift the playfield and look around.
Also, the backbox lock is #'d... You can always find a replacement key you can order for it.
You're currently viewing posts by Pinsider meegis.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/all-hulk-get-is-tilt-avengers-club?tu=meegis and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.