There is a very thin wire on the hulk coil that breaks from time to time. This wire is held down by a thin zip tie it seemed to create a high stress point. I resoldered the lead to the coil. And ran both wires to one side held by electrical tape and continued to tape past the coil to distribute any force on it. Rotordave had a post in a thread about it somewhere. It's been about two hundred games since and I haven't had a problem yet.

Hoping the new sounds some of you guys have worked out turn out nice. And that you are willing to share.

Mine is broken in a clean line at the thinnest part. You have to look for a broken plastic to find it. When I got my tweak kit from stern they included a new one. I decided not to install it figuring that if I restrict movement to avoid breakage it will be harder to complete hulk. Gov were you able to get hulk back up and running again?

Not trying to sound inappropriate but do you occasionally get random ball drains? My trough opto would occasionally act up. When I contacted stern they gave me a jumper cable to connect the trough opto to the original cable. I think they were thinking the connection would be more snug, have not had a problem since. While they were at it they sent out the fix kit. You may want to verify that yours was already put in, it makes the BW to hulk saucer much more successful.

I would suspect the trough cable. It would happen intermittently to me reseating it would help for a little while and come back. I read some people zip tied it. If you email stern customer support they may have some ideas. They seem pretty helpful.