Missoula, MT
Just picked up a Goldeneye yesterday as a project (got it for $1000). In pretty good shape overall with a lot of things functional. One of the main things that it has an issue with is that it appears all the high power coils aren't firing. I'm fairly new to all this and have only worked on my Stargate in the past, but excited to dig into this! I just got it yesterday afternoon so just starting to troubleshoot and hoping that you guys can point me in the right direction. When I initially ran the diagnostics coils 1, 2, 4, 8, 9, 10, 11, 12, 13 and 14 weren't firing. All of which appear to be on the high power circuit (50v). No fuses are blown and everything else appears to function normally. No corrosion on initial inspection. Made sure the coin door was closed and nothing looked out of the ordinary on that switch. In a quick multimeter test I wasn't getting any voltage at the coils but the 50v board led is lit. I did find some random wires in the bottom of the cabinet that correspond to the high power circuit but no idea what they go to. The brown/blue wire had electrical tape loosely at the end and the yellow/violet was just laying there. There were a couple other terminated connections that are loose as well. Anyway, any and all assistance is greatly appreciated!
IMG_0739 (resized).jpgIMG_0732 (resized).jpgIMG_0734 (resized).jpgIMG_0741 (resized).jpg
