I have a Congo that I discovered none of the flashers are working at all on. I am looking for ideas on where to start and what could be possible issues to look at. I looked on pinwiki but from what I can tell it only talks about board issues when It comes to flashers. Is this maybe a board issue or could it be something as simple as a blown fuse? I just need some ideas of where to start to diagnose this.
Is your coin door closed? If not, did you pull the white coin-door interlock switch out when testing?
It could also be fuse F107 as that is for all the flashers. Often times you can't look at the fuse and tell if it's blown, you'll have to pull one end out of the clip and test for continuity.
Quoted from schudel5:Is your coin door closed? If not, did you pull the white coin-door interlock switch out when testing?
It could also be fuse F107 as that is for all the flashers. Often times you can't look at the fuse and tell if it's blown, you'll have to pull one end out of the clip and test for continuity.
I had no clue that the door had to be closed for the flashers to work. I tried what you said and the damn things work. Lol now I know!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/all-flashers-out-in-wpc95 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lake Havasu City, AZ