Alien (Heighway Pinball)
Heighway Pinball, 2017
Alien (Standard)
Pinball Brothers, 2020I had designed a small number of Motion tracker mods for the original Heighway Alien pinball a while back.
Red_Devils asked me to make one up for him for his new PBB Alien so have decided to make a ltd batch for this new Pinball.
Older videos shown above
PM ME IF YOU WOULD LIKE ONE.
Picture courtesy Red_Devils
Thanks all for the support.
All on the list as well as all that PM'd me.
Bare with me as I source bits for this.
Quoted from swenny:What's the cost? I didn't see it mentioned.
Cost would roughly be £150 UK GBP delivered.
Red_Devils is kindly helping me out for a stable mounting solution.
Not having the pin myself doesn't help 
I'm looking at mounting the MT on a clear using the pillar and shooter lane protector screws.
Any thoughts on the subject your all welcome to air your ideas and advice.
Have thought about lighting the shooter lane also using the clear.
But may shelve that due to time and added complexity.
OK I have reached this batch qty
Royale-W-Cheese will place two for you as some people drop out.
Quoted from Vimtoman:OK I have reached this batch qty
EightBallTexas will place two for you as some people drop out.
Very True and Thanks.
OK all parts on order.
Displays are going to be around 6 weeks plus to arrive.
I've opted for multiple deliveries so some may come in early.
Quoted from Vimtoman:OK all parts on order.
Displays are going to be around 6 weeks plus to arrive.
I've opted for multiple deliveries so some may come in early.
Damn. I like your style .
Quoted from Vimtoman:OK all parts on order.
Displays are going to be around 6 weeks plus to arrive.
I've opted for multiple deliveries so some may come in early.
Yes this is wonderful. Thank you. Will you message us individually when ready for payment and shipping information?
The first batch limit has been reached.
Soon as all the parts have arrived I will PM contact details etc.
Thanks for the great response to the mod.
Will post update during the wait.
Have made the decision to have these MT enclosures to be professionally printed and polished.
Next stage to spray,add decals and clear.
I need one other person to test out the mounting plate for it.
Will involve printing template up and checking on pinball.
PM me if you have the time to do so.
mt bunch (resized).JPGQuoted from Vimtoman:Have made the decision to have these MT enclosures to be professionally printed and polished.
Next stage to spray,add decals and clear.
I need one other person to test out the mounting plate for it.
Will involve printing template up and checking on pinball.
PM me if you have the time to do so.[quoted image]
Cant wait to see next stage. TY
Proto mounting plate designed with the help from Dave and Steve.
Laser cut by Col.
Thanks guys.
They will be receiving these in the coming weeks to check out.
Will be supplied with screws and posts.
In Acid green.
The protective layer is still on so does not look clear.
Sure the guys will post pictures if the fit is good.
mounting plate (resized).JPGHave played with the boot up sequence and added a fingerprint login video.
Will ask buyers what name they want added to theirs.
This will be fixed in code so make sure you want that name set.
Could be Pinside handle. Character from film? . No obscene names allowed
Quoted from Vimtoman:Have played with the boot up sequence and added a fingerprint login video.
Will ask buyers what name they want added to theirs.
This will be fixed in code so make sure you want that name set.
Could be Pinside handle. Character from film? . No obscene names allowed
I Have always liked Supreme Commander...HAHA....I will go with something simple...." MARC" or ???. let me think on this...
Quoted from Royale-W-Cheese:I Have always liked Supreme Commander...HAHA....I will go with something simple...." MARC" or ???. let me think on this...
When I receive the batch of displays in September and have them partially assembled I will contact all buyers and ask what they would like entered.
Quoted from Vimtoman:When I receive the batch of displays in September and have them partially assembled I will contact all buyers and ask what they would like entered.
Quoted from Manny65:Spunkmeyer, Vasquez and Hudson are classic names from Aliens ... I'm probably leaning towards Hudson as the name I'd use
Ive put "Pvt Drake" on the demo.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/alien-motion-tracker-mod-pbb/page/1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Melbourne
Edmonton, AB
Lake Forest, CA
Nürnberg
