I did enter at own risk
Regards Pat
You're currently viewing posts by Pinsider the_one.
Click here to go back to viewing the entire thread.
Quoted from chuckwurt:So brutal when you’re in brick mode on that game. Haha.
It‘s a brutal world
Quoted from Gnrwarkfc:Yes it was in co op! It was a big accomplishment for us!
Doing the same often! But not reaching BDB with my wife
I do have a question regarding the target decals. Have they been optional from the factory? I do have them but have seen some they don’t have target decals.
Regards Pat
My ACNC is working flawless. Just the Topper (gauge servo) made some problems but Spooky did sent me a replacement for this. They do react quite fast and very customer oriented. Good support.
Quoted from Rat:...
But this is a deal breaker for me.....
I'm glad that you guys are enjoying Alice and not bothered by this coding, but to me Pinball has no end, that is it's beauty.
See you round, I'm off to the new GNR thread with everyone else
But you can leave the GNR thread directly because it has somerthing similar, switching flippers off if you’d playing a song bad ....
Quoted from Eric_S:I just installed the PinMonk fan and it is a great upgrade. I didn't realize how loud the original power supply fan was until it was replaced. It took me about 40 minutes to do the swap. Very good instructions and a nice video on the Pinball Life website helped.
https://www.pinballlife.com/spooky-multimorphic-plug-n-play-quiet-fan-kit-600w.html
I did the same, what a great silent improvement
It is, 12 and 5 Volt. Look to the right hand side beside the big power unit, there is a small splitter box. Same where you need to connect the incredible Mods from Medisinyl, handmade by Greg. V2 / Com has 12 V whereas V1 / Com has 5 V
0514D03F-587B-444E-B9CB-3DC1789F4B9A (resized).jpeg1ABE8B50-76E3-460D-B0F5-40CC23D2370E (resized).jpeg31C6550E-A410-4648-8060-2FF95B7259B6 (resized).jpeg40088FCA-3C1D-4CB3-A380-CCFEBCE75103 (resized).jpeg773B7A22-585A-4FE7-8D93-0801DD011D66 (resized).jpegC6F72FBA-FDDB-49F4-8ADC-0E89DC8EC996 (resized).jpegQuoted from Lethal_Inc:Nice! I thought Spooky didn’t make anymore or are you getting one of those solid rock models? Congrats!
Is that really true or a fake side?
I thought they have been sold out for quite a while.
Quoted from Twilight1:Looks like we have the same birthday day. Mine has the upgraded speaker option. Just wondering if yours does maybe that the differences you are seeing? [quoted image][quoted image]
Looks like we have all the same birthday
021718 isn’t the birthday
Mine is #280, having the black amp
Quoted from Lethal_Inc:It's probably a 6-32 screw that screws into the standoff. Hey Charlie, can you shed any light on the amplifier I have in my game? I can send you more pictures if needed. The serial number of my game is ACNC0217180276. Thanks!
Curious.. mine is #280 and is having the black amplifier installed.
Quoted from dnapac:To those with the topper. Mine stopped working. Blew the fuse. Replaced it and it works again…accept, Mr brain seems to move less (code thing? Have the latest code) and the dials don’t move. Anyone opened it and know the correct connection pins…I may have accidentally changed a connection. If nobody knows, that’s cool…I’ll hit up AJ at spooky or maybe that servo went bad.
I had to change the dial servo right atvzhe beginning, running now more than 1 year without any problems. Here some pictures, hope it will help you on Halloween
06451B74-72E7-4CE7-9869-8D5183C5C905 (resized).jpeg422FB8A8-F43B-405F-88A1-AC51AF7D0A37 (resized).jpegD484FCAB-8659-4606-B54D-7ACFCA20ED7D (resized).jpegQuoted from ThePinballCo-op:High 8s? I'm not shocked. This was one of the last games I thought was still selling far too low.
Fair value or not depends on the buyer. IMO, even if you pay a few hundred over, you're not going to lose value on it. See if you can talk them down, start at 8500 maybe. If it has lots of add-ons and pinstadiums or whatever, the seller may not budge and I can't blame them.
Absolutely correct. And compare to the prices people going to ask for recent STERN toppers, the Alice topper seems to we worth now as well 1.5k at least. I have seen Elvira topper getting sold at 2.2k USD here in Germany … that‘s really ridiculous
You're currently viewing posts by Pinsider the_one.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/alice-coopers-nightmare-castle-club-enter-at-own-risk?tu=the_one and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.