sometimes when I block the ball on the left ramp and lock the second ball in the crypt (behind the target)
the game stays blocked and doesn't send me a third ball in the launch ball ejector, the game stays blocked,
I looked and there are 2 more balls available ready to be launched
i must shutdown and restart the pinball
anyone have an idea? game is up to date

thanks

Thanks i will check

1- does anyone know if it's possible to get a report showing the errors on the game? bad switch , optos or coils?
i'm interested in checking if everything on the game is still good

2- possible to rebuild the flippers with WPC95 parts? seems to be the same?

How to check if the pinball is working fine ? any feedback?
i don't know if it's still the problem of the magnetic balls but 2 balls are blocked in Frankenstein
when i turn the pinball machine off and on, balls are still stuck
any ideas ?

I was frustrated because I play every day and not being able to play it was a blow to the head. ACNC is really really a great game for me

does anyone have the original instructions for the apron cards? not found on the spooky website

I also confirm that the pinstadiums are really necessary on ACNC,
they should have integrated them in the pinball machine during the conception.
it is really incredible when you have to shoot the jackpot
what a great pinball . ACNC is the new Medieval Madness

this week i made a nice score 167M, i lost at the 7th monster, the Zombie, it takes a lot of concentration to get there. it's 9 monsters to get the final.
I hope to finish ACNC one day what a great challenge

you have to cut it in half in the width.
https://www.amazon.com/Pllieay-Adhesive-Polyester-Furniture-Surfaces/dp/B07CPN1WRS/ref=sr_1_18

thickness should not exceed 1 mm /0.04"
It works very well but it's a little hard to remove the glass

I saw a serial number with MATT2 as the last digit.
What is it?

So this is the number 002/500 ?

only the original topper is absolutely crazy
if you wait the aftermarket it's also crazy for your wallet, spooky made them if i remember around 300-400$

who drew your posters? looks good

for this shipping cost you have a good vacation in the USA to get the topper in person

On Butter cabinets is it more resistant than decals ? i think yes but not sure

I wanted to know if it was normal to have from the speaker panel RGB lighting , a slight loss of continuous brightness.like a crackling light. It is barely noticeable but I do not encounter this on my other spooky pinballs

Thanks!
I saw that when i added from the Speaker Lighting kit an RGB led strip under the cabinet

Which color?

Does anyone know the prismatic color on ACNC ? i'd like the blue color on my coindoor
Thanks