Airborne Avenger
Atari, 1977You're currently viewing posts by Pinsider goodtobedad.
Click here to go back to viewing the entire thread.
I picked up a nice looking Airborne Avenger and I'm having a problem with the 90 volts on the old score display. With the power cable unplugged from the score display, the match/credit display works correctly. When the power cable is plugged in to the score display board, neither of the displays work. It seems that something on the score display board is pulling the voltage down, but I can't figure out what it is. Anyone have any ideas? Thanks!
I found the power issue - there are two bad chips on the board. One of the chips I can order from Marco. The other isn't so easy to find. If someone knows where I can get an sc75004p, please let me know.
Quoted from G-P-E:What does the schematics say the part number should be for that one?
The Schematic says SC75004p. There were two versions of this display board used in these machines. The one I have is referred to as the "old score display". The other version may not be using this chip.
DennisK did some digging and found what may be a good substitutes for what I'm looking for. I'm going to take a look at them and post the results back here.
You're currently viewing posts by Pinsider goodtobedad.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/airborne-avenger-display-board-power-issue?tu=goodtobedad and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Prairie Village, KS