After months of restoration i finally put my AFM back together today and was really happy that most everything was working until.....

The center bank motor wasn't working and i had an issue with my pop bumper lamps (but i have a Bill Ung expansion kit so i know it is somewhere in there). I figured I would start with the bank targets and see if i can get them going, when i checked it is on a flasher circuit so i tested the flashers and they were working. But i knew that the center arrow flasher is connected to the bank target motor. When i went to test the center arrow flasher the display went out.......now I am pretty much at a loss and dont know where I should go from here. I was totally thrilled that there was so few issues after all this restoration and now I am in a corner and could use someones help that has some experience.

what should i do now?

thanks for any help any of you can offer.......

Rob

The display is a color DMD if that helps in locating and resolving the problem...

Connector mixed up....

Stupid mistake.

Thanks