Hey guys I am having major issues with SDTM from the elevator on my pro.... I have adjusted the strength of the coil to every strength possible and it doesn't help... I have taken it apart more than five time and physically twisted it as far left as it can go but it always seems to eventually start draining down the middle again.... On the last attempt I even tried to drill the hole to the right a little more so it had more play.... and it still drains. I was told to put washers under the right side of the mech to give the scoop and angle to shoot out. Would that work?

Ok cool... cool I will try that. How far back does the bend need to go into the scoop for it to affect it? 1/4"?

Thanks guys... I will first try the washers and if that doesn't work I will attempt the bend. Doesn't make sense that it isn't shooting right to the flipper. I was also thinking of maybe switching the cool with the other scoop... as it doesn't get used as much!? Maybe more power? I will start with the washers and follow up with results.
And yes I made sure the playfield is level left to right and also did check to make sure there was no friction with the mech.

why is yours all apart?

that looks sick dude!!!