Download from site took about 15 minutes for me.

Used 8 gb usb formatted fat32

First attempt on update got stuck at 520 mb and didn’t move for 15 minutes so I turn the machine off and back on to restart.

Second attempt worked fine. I didn’t remove the drive or anything, just turned it off, back on, and followed the prompts. Took 10-15 minutes to update.

I'm having a flipper problem. Any help or suggestions are appreciated.

I am having random(kind of) flipper lag. Here are the details. Aerosmith Pro. I have had it for 9 months and never had this issue until recently. I do have BriteButtons that have always worked fine. Only happening on the Right Flipper. Only happening during multiball. Not sure if it is a coincidence or not, but it started after the update.

I looked to see if there were any obvious disconnections or obstructions and don't see anything.

Does it sound like a software or hardware issue? Any suggestions on how to narrow it down or fix it?

Should I leave this post in the Aerosmith group or make it a separate post? I am putting it in the Aerosmith group because I thought if its somehow related to the update others might be experiencing the same thing.

Thanks,
Kevin

Thanks for replies with some ideas of what to look for. Since I was only having the issue on the right side I tried to compared everything on the left side vs. right side to see if anything looked different. I found that the straight piece of metal on the contact switch that the flipper button hits seemed to have almost a burr on the metal on the right side and it’s was perfect on the left side. So I just used some 1000 grit sandpaper to lightly sand it. Seems to have fixed the problem because I haven’t had the issue anymore.

Is there something that would cause the contact on the switch to go bad or be so much worse on one side compared to the other?

972E5ED8-BF05-4FFE-A9CF-1611F400509A (resized).jpeg