Quoted from rotordave:The new Spike games sound pretty good for stock machines. Separate bass and treble controls in the menu too.
rd
Where? I don't see any on BM66
You're currently viewing posts by Pinsider jimb.
Click here to go back to viewing the entire thread.
Quoted from rotordave:The new Spike games sound pretty good for stock machines. Separate bass and treble controls in the menu too.
rd
Where? I don't see any on BM66
Just joined the club on the premium and very happy with it. Since I'm late to the game what's the must have mods? I have the stern topper on order and will get the flipper fidelity speaker kit for it.
Just installed the Stern topper and gee whiz can they save any more money? The RJ45 cable is too short to feed through the wire guides. Another inch or two please. The manual doesn't even show it that tight when they installed theirs.
Quoted from KirboTurbo:here are some new rules cards i put together. I really like the photo of the band.
Does someone have the purple ones sized for printing? I tried saving the photo but they don't seem to line up when uploading to a photo printing site like Costco.
Quoted from KirboTurbo:Ok, we'll try again with pdfs.
Thanks, just ordered a print.
Quoted from rotordave:BM66 has never reset. And we are playing it hard out.
Playing the heck out of mine too and for two update cycles resets kept happening. The last update where they removed stacking it stopped.
I wish the code update could have fixed the no sound on the drains. It's not a big deal but it's so annoying not to have it working. Good place to add the first callout from Steven too.
Quoted from Spiderpin:If your updating code and the updating freezes for 10 minutes. Do you just turn off at power switch and wait for LED lights to go out and then try again? Thanks in advance.
Yes, happens in both BM66 and AS
Quoted from JimB:Does anyone have some more photos on where all the cliffy pieces go on a premium?
Looking for these 2? One or both under the mini playfield? If so is it too much trouble to remove to install?
Quoted from pkrobin:No issues here. Carefully check the connectors and things. I think the manual shows you which one is #8. These things are delicate.
Out of curiosity, did you install the recall "kit"?
Only installed the cap kit with the tie wraps
Yes that is the kit I had my dealer install before it left the showroom. Last March is when I got it.
I checked all the connections on the board nothing looks loose. The tie wrap looks fine nothing appears to have broken loose. Just says node 8 not found on boot.
7F5F5BAE-4A5C-4E0A-9590-C52586D0D11A (resized).jpegIf they wanted to sell more should have had one rolled out during Steve’s VMA performance. He could have pretended to play it during the song.
Maybe nothing ball was stuck under the elevator. Never had that happen. That would definitely cause my issue.
Anyone else think the side drain sounds are too low? Glad they added them but want it to stand out more to add to the frustration.
Quoted from WJxxxx:If you complete the flower
Can you elaborate what that means and how to do it?
Quoted from c_mario:HI,
I was wondering if there was any factory Modification to stop balls getting stuck on top of the plastics under the upper playfield on an Aerosmith Premium. This has happened about 5 times. When ball is on the upper playfield and it is hit into the Elevator to drop down to the Ball lock. It is deflected ontop of the plastics below the upper playfield. I had to remove the upper playfield to free the ball. This just happened again tonight.
Any Ideas?
Regards
Mario.
I have one stuck up there too, Ended up just adding another ball so I didn’t have to take it apart.
They only way I can score better with this new code is to try to keep multi-ball going a lot longer than my usual. If I don't my scores are much lower with this update.
Old code allowed much higher scores for me and my friends. Now it’s a slog to try to get anywhere close. I wish they had some adjustments to help but none does.
Another upvote to remove the post. I got a new #1 high score on my first game. Loved it. I found a square Stern pinball sticker from ghostbusters I covered mine with. You can’t see that area when playing.
This video would be great to add. Maybe at game over or attract:
https://m.facebook.com/story.php?story_fbid=2719647054917340&id=2077686002446785
Quoted from WhiskeyTango:It's best to do this on a separate SD card. Personally, I have a bunch of these on hand for when I mess around with games.
amazon.com link »
Is saving/restoring scores and settings doable ahead of swapping the Sd?
Quoted from Meegis:Waiting on someone with a premium/LE to give feedback.
Very curious how this will turn out.
Also, what is the procedure for making the SD Card work properly for this?
Got it loaded on my premium. Free play, dude and walk this way works fine. The others look the same except sweet emotion is a black screen instead of the cartoons or your replacement.
Thanks
Yes right file used. Says LE on boot up. I just tried last child and it behaves exactly like sweet emotion. Black screen through game play. A few music notes graphics on that black screen.
It’s all working. Turns out that etcher was the problem. You have to use win32imager. Let me know when you add more video.
Quoted from djreddog:Downloaded the Premium/LE version. Flashed to SD card. Game goes into a boot loop. It comes up to v. 1.07 LE, then just says "game restarting" at the bottom. It reboots over and over again. Thoughts?
Same here. I tried 3 different tools to flash the sd card, 2 different PCs, tried 3 different sd brands but still rebooting over and over.
I ordered another sd card from Amazon to see if that works. If anyone succeeds with a premium please post.
Quoted from Vino:Never had a problem with the songs (70s vs newer tracks) or animations on this game - find them unique and a good fit with the artwork.
Pinside had this one wrong again imho.
He’s talking about the cartoon video. Switching to real videos is what’s needed. WhiskeyTango started to do it and gave it out but he ran into lip sync issues. I still use his cause it’s so nice.
Quoted from playtwowin:New to club Aerosmith. Where can I get the code with video assets. Any help would be great appreciated. Thanks.
Not available yet. See post 3453
You're currently viewing posts by Pinsider jimb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aerosmith-owner-then-walk-this-way?tu=jimb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.