Play better.
With the VIP save you are really only impacting one side.
I'm still trying to get used to the outlane divider on the left as it is more difficult to nudge out of trouble with the wire and not a post.
You're currently viewing posts by Pinsider black_knight.
Click here to go back to viewing the entire thread.
Play better.
With the VIP save you are really only impacting one side.
I'm still trying to get used to the outlane divider on the left as it is more difficult to nudge out of trouble with the wire and not a post.
WJ, you just listed three things you can't do on the machine: finish modes successfully, elevator MB, play long enough to get a bomb. OK the last on is a stretch for anyone.
If you think Elevator is especially hard, work on it. It's just orbits and elevator.
This machine is simple, but not easy, just like the classics. Doesn't need deep code if you 'can't finish it' regularly.
There are two wire connectors under the toy box make sure they are seated well. Mine came loose and had the same thing happen.
No more power cutoff switch on the door so power is normal.
I just used some long nosed pliers.
It takes a try or two but you don’t need to take anything apart.
Quoted from pkrobin:I can't imagine why restarting a game before the Toybox empties would ever cause an issue.
Me either but the posts above were about how they get to attract mode before starting a game in order to avoid a reset.
I start the next game pretty fast and have never had an issue.
However I did replace node 8 board right after I got it, so maybe that’s why mine is stable?
#2 is a connector under the toy box. There are two of them under there, one of them has come loose, can't remember which one.
Reseat it and you are fine.
If you can't get to that, then make the ball lock virtual until you find someone to help you.
There is a feature adjustment to make the ball lock virtual. If you set that, you can play he game without any isues while you wait for a fix.
You're currently viewing posts by Pinsider black_knight.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aerosmith-owner-then-walk-this-way?tu=black_knight and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.