You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Quoted from Mombo-number-5:Has anyone noticed that less and less of the .156 molex crimp contacts don't have an equal "wing" on each side of the top to slide into the housing? I have been tossing out around 28% of them these days.
Where did you buy these from? Did they come from a reputable electronics supplier or ebay?
Quoted from Coyote:"V100ĦA15". I can't see nor make out what the "Ħ" is supposed to be.
It should be a "Z" which is Littelfuses standard varistor codes. See "V100ZA15P" at GreatPlains. An alternate part number you can use is "14D101K"
Quoted from Coyote:Are the specs the same on the 43v coil feed as the line voltage (120v)?
No.
The line voltage varistor is a higher voltage part and won't be effective across the solenoid voltage at suppressing lower voltage surges.
You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/advise-for-early-solid-state-owners?tu=quench and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
