Yes I do this all the time just use a heat gun with a scraper they come off easy they after use a sander 80 or 100 grit then go too 150 grit let the sander do the work and then go too 240 or higher too finsh off good too go
You're currently viewing posts by Pinsider williampinball.
Click here to go back to viewing the entire thread.
Yes I do this all the time just use a heat gun with a scraper they come off easy they after use a sander 80 or 100 grit then go too 150 grit let the sander do the work and then go too 240 or higher too finsh off good too go
Quoted from Williampinball:Yes I do this all the time just use a heat gun with a scraper they come off easy they after use a sander 80 or 100 grit then go too 150 grit let the sander do the work and then go too 240 or higher too finsh off good too go
Way way cheaper this way always works very well
Quoted from Johncare07:williampinball why not just sand it all at once?
Because it would just clogged up the sand paper fast and go though a lot , I find its easyer too use a heat gun with a scraper then sand put its up too u
You're currently viewing posts by Pinsider williampinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/advice-please-decal-removal?tu=williampinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.