Paradise, NV
Quoted from currieddog:Do you have a high quality scan of the schematic you can post?
Yes, OP, please post one. If you have the schematic you can get a high quality scan of it from (for example) Staples ($2) or Kinkos ($6)
(Topic ID: 237125)
Linked Games
Loop the Loop
Bally, 1966
Topic Gallery
You're currently viewing posts by Pinsider mrbally.
Click here to go back to viewing the entire thread.
Quoted from chas10e:http://www.planetarypinball.com/reference/partsmanuals/BLY_Parts_1969/index.html#/45/zoomed
Looks like the Hold relay is part # c-7800-335 https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=C-7800-335
The 2'nd coin (same as 1'st & 3'rd coin ) chute # c-7800-384 https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=C-7800-384
You would have to see the value of the resistor on the schematic but a fantastic post here about it & what it does https://pinside.com/pinball/forum/topic/what-is-this-4#post-3358932
Note that on this era of Bally flipper games, the hold relay is energized and the Tilt or slam switches literally short the hold relay hot wire to ground causing the relay to drop. It also causes one helluva spark when the switch is "made".
You're currently viewing posts by Pinsider mrbally.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
