I have a real potpourri of lights on mine.

I tried out pinballbulbs.com and ordered color-matching clear dome 44/47's and 555's for inserts. I also used frosted and clear for topside and like the results. I had some Ablaze 3&4's left over that I sprinkled in as well. I used Ablaze blue 4's on the large blue inserts. I added a spot light with an Ablaze 3 white in it. Color changing for the "shoot again" insert. LED strip behind the rear banner. Plus there's still a few incandescent bulbs here and there.

It was trial and error for me until I found the mix I like, of course everyone has different taste.

Here's a good read on JP mods and lighting if you haven't already seen this:

http://pinside.com/pinball/forum/topic/share-your-jurassic-park-mods

IMG_0614.JPG

Thanks guys!

Sorry, no list. You'll have to do it the hard way like I did. I looked under the pf and color matched the ones I needed as well as if it was a 44/47 or 555. Then I looked at the top-side and estimated what I needed there, plus ordered a few extra of each in case I wanted to change things around. I also had left overs from a previous order.

I did make a list for an order, but I was doing two pins at the same time, so that wouldn't help you.

Figuring out what you need is half the fun!

I ordered regular LED's and didn't notice any ghosting, there is a little from the scoop icon lights but not noticeable while playing.