good luck on the build

this is a handy search engine though looks like it is shutting down on the last day of this month. It is a good way to hunt down game specific parts from all the pinball supplies - search hard and fast before it goes.

https://www.pinballsearch.com/#gsc.tab=0&gsc.q=Addams%20family

here is a hot ridded pins TAF with a few photos of the finished game - good to add to the collection for your project

http://hotroddedpins.com/examples-1#/addams-family-black-2012

also here is a guy doing a 7 part restoration of TAF, though I doubt he should drilling out some of those holes in the playfield - double check here when you get to that stage.

https://www.youtube.com/channel/UCrZB72rsf672laK0DLzAFbg

you have probably seen this but would be a good thread to follow
https://pinside.com/pinball/forum/topic/it-s-showtime-rebuilding-a-classic-the-addams-family-

and use this search engine to find parts
https://www.pinballsearch.com/#gsc.tab=0&gsc.q=the%20addams%20family%20pinball

ambitious project but hats off to you, but please get some rubber pads and better clamps - would hate to hear that you have a playfield fall and damage

also just in case if you haven't been here download the parts list from
https://www.ipdb.org/files/20/Bally_1992_The_Addams_Family_Parts_List.txt
and start ticking the parts off and start a spreadsheet of what you have and then use
https://www.pinballsearch.com/#gsc.tab=0
to locate the pieces and places to get them to save you on some freight

enjoy