Quoted from Bryan_Kelly:I think what he's going to need are measurements for the pivot bolts and nuts. Paul doesn't drill those holes. I have an empty TAF cabinet I take take those off of, if need be. Not sure how you'd determine where those go otherwise.
Hi Bryan! Since so many restorers have different ways to go about things, e.g., guys like Chris (HEP) make adjustments to the OEM location, there's no 'right' way to pre-drill them. Imagine if they were in the 'wrong' spot. Ugh. Not what I want for either party. I can provide those hole locations, also, if needed. They aren't always the same from machine to machine either, making it more difficult at times. LOL
For the backbox GI board hinge, some guys like to raise them up a bit, so it doesn't hit their ColorDMD screens.
Quoted from loneacer:You'll have to drill the sides of your cabinet for the bolts that hold the playfield in. You'll probably also have to drill holes in the top of the backbox for the cloud topper lights.
He purchased a TAF cabinet, so the topper holes are already done. Same with WH2O, JD, etc.