Hi I have an Addams Family machine which is showing - Missing Pinball Error when I try to start a game.
The three balls are in the through, I've tried the test and the central and left through are working, I replaced the right through switch and diode but still has the error. Does anybody have any suggestions?
Many thanks Joe.
Jumper across the switch contacts in switch test to see if that switch registers. Pull the connector on the CPU/MPU board and inspect and/or replace the pins for that switch input into the board. Any battery alkaline corrosion? Batteries “leaking”?
Quoted from GreenMachine19:Jumper across the switch contacts in switch test to see if that switch registers. Pull the connector on the CPU/MPU board and inspect and/or replace the pins for that switch input into the board. Any battery alkaline corrosion? Batteries “leaking”?
Hi, theres no battery corrosion and they have been replaced. What number connector is it on the CPU/MPU board?
The switch doesn't register for the "right through" although the switch & diode have been replaced.
Regards
Quoted from Joelp96:Hi, theres no battery corrosion and they have been replaced. What number connector is it on the CPU/MPU board?
The switch doesn't register for the "right through" although the switch & diode have been replaced.
Regards
Are there any other switches not working? Switches are daisy chained together by column and rows. Could be a broken wire at the next switch. Pull out the manual and have a look at the switch matrix. Check all other switches that share a row and column with the non working one.
Quoted from GLSP3022:Are there any other switches not working? Switches are daisy chained together by column and rows. Could be a broken wire at the next switch. Pull out the manual and have a look at the switch matrix. Check all other switches that share a row and column with the non working one.
Ok I will have a look and check the switches that share a row.
The kickout switch that puts the ball into the shooter alley at the start of a game isn't working aswell.
Thanks
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/addams-family-missing-pinball-error and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Groton, CT