Hi pinside. Having trouble with my Addams family. Lights flasher and gi lights, motors do not work only the dmd, but when you leave it on for 10 minutes or so the lights and motors will slowly turn on makes me think it is a bad cap or something. Also I pushed all the chips in on the CPU and now Everytime a ball drains it tilts and adds a player. Tested all fuses and ribbons if any body has any advise please let me know I'll take any advise I can take at this point. Thanks for your time

Found the problem with the outhole there was a diode that was shorted on another switch went into the switch edge test and traced the wires, so my machine is playable, but still has to warm up 10 minutes before any lights will turn on any any ideas I read the PinWiki and will try some of those options tommorow anyone with any suggestions please let me know thx