Quoted from SkillshotExhibit:Any advice on what I should try next?
Tests - Switch Edge - hold flipper button in - do both leaf blade switches register on the screen and stay on ?
Start by sorting out power or flipper button switches.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Quoted from SkillshotExhibit:Any advice on what I should try next?
Tests - Switch Edge - hold flipper button in - do both leaf blade switches register on the screen and stay on ?
Start by sorting out power or flipper button switches.
LTG : )
Quoted from SkillshotExhibit:what do you mean by sort out power or flipper button switches?
Do the coils get power - yes-no ?
Do the switches work - yes - no?
One or the other. Not likely both.
Quoted from SkillshotExhibit:the bottom right flipper is jumping up and down several times
Quoted from SkillshotExhibit:The switches are brand new
You never had a new part fail ? On leaf blade switches, it is possible the contact on the end of each blade ( looks like a rivet ) might not be making a good electrical contact with the blade.
LTG : )
Quoted from biscoseattle:My guess is its a problem with the flipper switch but not sure how to troubleshoot it.
Tests - Switch Edge - Hold flipper button in, see if one open up. ( I doubt it )
Coil - could be a bad coil, broken diode leg on coil, poor solder joint on coil, or thin wire from one of the coil lugs going into the coil has a break or crack.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/addams-family-flipper-problems?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.