How are the magnets attached to the wires? Isnt it a molex connector? I am just thinking through what could be going on. The transistor fails as soon as you take it to test that coil?
You're currently viewing posts by Pinsider Tlamb.
Click here to go back to viewing the entire thread.
How are the magnets attached to the wires? Isnt it a molex connector? I am just thinking through what could be going on. The transistor fails as soon as you take it to test that coil?
If you put the right magnet where the left is, does it still blow the transistor? and vise versa, can you get the transistor controlling the right magnet to blow using the left magnet?
So Q44 is the transistor blowing? It appears that the Right Sling comes immediately before the Left Magnet (J127-9 / Q44) in the coil test, you can let the test repeat the Left Magnet without issues but when you come back to it in fails? or it fails when you go specifically back to the Right Sling (J127-8 / Q46). Nothing is plugged into J128 or J129 on the Power Driver Board correct?
You're currently viewing posts by Pinsider Tlamb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/addams-family-blowing-magnet-transistor?tu=Tlamb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.