Buy this week (prior to July 7) and take advantage of our sitewide sale- 10% off everything.
You're currently viewing posts by Pinsider mrs_mezelmods.
Click here to go back to viewing the entire thread.
Quoted from Pinballerchef:Oh there is?? I didn't know.....I'm not sure how this would work either. It would be cool tied into the pops since they get a lot of action....but they don't "flash" for the effect.
So what kind of connector would you need for the
Quoted from kbliznick:Read this one
http://iobium.com/flashers_in_the_pop_bumpers.htm
It shows how to connect a new flashbulb and tie it to the coil on the pop bumper. CFTBL comes with no lamps in the pops, the mod is to put small 5V or 12V flashbulbs into the pop bumpers rather than just adding GI lamps. There is an individual lamp in each pop bumper that goes off when the bumper bumps.
Wiring it for Gorgar would be almost identical. You can even tie all 3 pop bumpers to cause the single flashlamp to go off when any of the pop bumpers are hit. (same as in the instructions only instead of wiring an individual lamp to each coil, wire the same lamp to all 3 coils using a diode for each)
Ok- seeing if we might be able to do this.....
You're currently viewing posts by Pinsider mrs_mezelmods.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/acdc-propremle-mod-lighted-horns-mezelmods?tu=mrs_mezelmods and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.