London, ON
Quoted from newpinbin:In the rules I thought it said when Tunes n stuff is light you can then change a song?
Yes, IF you complete the song tasks! 
(Topic ID: 80953)
Linked Games
AC/DC (Pro Vault Edition)
Stern, 2017-
AC/DC (Pro)
Stern, 2012
Topic Gallery
Quoted from ezatnova:That’s correct. You’re getting stuff, not tunes.
Just make sure not to get Oi Mania or you’ll be sorely disappointed. (Oh Lyyyyyyymaaaaaaan….lyyyyyyyymaaaaaaaaaaan, hello? Bueller? Anyone?!)
Oi mania! what is it? Had my pro only briefly. Had premium years ago but didn't know about that then either.
Boston, MA
Quoted from Shenanigander:Oi mania! what is it? Had my pro only briefly. Had premium years ago but didn't know about that then either.
V1.70.0 – Feb 12, 2018
– OI MANIA (7,500 PER SWITCH. OI!)
I've never played it on my Pro. It was added in 2018, and I don't think it was coded right. Maybe some day Lyman will surprise us again. But if he doesn't, that's ok as well. It's such a great game as is.
BUT (Hi Lyman), if he ever did revisit it, I'd still LOVE to have as part of the end of ball screens how much of a song bonus you didn't collect. Because I'm playing at home, I'm usually doing something stupid and risking it to double or triple it, or build it up higher. And I'd like to see what I just gave away as I drained as a final insult.
Quoted from newpinbin:In the rules I thought it said when Tunes n stuff is light you can then change a song?
There are two separate ways to light tunes n stuff. On standard settings, you need to light 8 songs on the jukebox to light it to change songs. Getting the three horns is the other way to light it, and it awards stuff, in a certain order. Sometimes it’s lit for both, and it will award both, starting with stuff (check the dmd).
Quoted from DaveH:V1.70.0 – Feb 12, 2018
– OI MANIA (7,500 PER SWITCH. OI!)
I've never played it on my Pro. It was added in 2018, and I don't think it was coded right.
When you get to Oi Mania (not an easy task) it does absolutely nothing. Big letdown. 
Quoted from DaveH:BUT (Hi Lyman), if he ever did revisit it, I'd still LOVE to have as part of the end of ball screens how much of a song bonus you didn't collect.
I'd love to see this too.
Avellaneda
Hi friends. I am new to the group. I have my ac / dc Pro.
I would like to buy the swinging bell. and other MOD.
Could you pass me Link where to buy? Thanks
Quoted from ariel_nizza:Hi friends. I am new to the group. I have my ac / dc Pro.
I would like to buy the swinging bell. and other MOD.
Could you pass me Link where to buy? Thanks
Don't forget to add a train! Any photos of your machine?
Quoted from newpinbin:Don't forget to add a train! Any photos of your machine?
I mounted my train in the proper lazy person position... sitting on top of the coinbox for 3 years and counting.
Quoted from newpinbin:¡No olvides agregar un tren! ¿Alguna foto de su máquina?
this is my ac dc. Happy to have it.
Where to buy the MODs?
WhatsApp Image 2021-06-17 at 4.51.40 PM (resized).jpegQuoted from newpinbin:Ok, maybe today?
Haha...just got home an hour ago and found a box of happiness at my door! I will be installing tonight hopefully and I will take a video of the action!
I also played a ONE of a kind custom ACDC homebrew pin today. Remind me to post the link of that video when I get it edited!
Quoted from DaveH:V1.70.0 – Feb 12, 2018
– OI MANIA (7,500 PER SWITCH. OI!)
I've never played it on my Pro. It was added in 2018, and I don't think it was coded right. Maybe some day Lyman will surprise us again. But if he doesn't, that's ok as well. It's such a great game as is.
BUT (Hi Lyman), if he ever did revisit it, I'd still LOVE to have as part of the end of ball screens how much of a song bonus you didn't collect. Because I'm playing at home, I'm usually doing something stupid and risking it to double or triple it, or build it up higher. And I'd like to see what I just gave away as I drained as a final insult.
Oh interesting. How do you get it?
Quoted from newpinbin:https://modfatherpinball.com
Tienes suerte de haber encontrado un ac / dc en Sudamérica. Debe haber sido un hallazgo difícil.
Thank you but I can't find the swinging bell on that link?
Do you have another place to buy that mod?
Quoted from ariel_nizza:Thank you but I can't find the swinging bell on that link?
Do you have another place to buy that mod?
This is the mod you need. But they are out. I will keep looking.
Quoted from Shenanigander:Haha...just got home an hour ago and found a box of happiness at my door! I will be installing tonight hopefully and I will take a video of the action!
I also played a ONE of a kind custom ACDC homebrew pin today. Remind me to post the link of that video when I get it edited!
YES!!! I hope it fixes everything.
Quoted from newpinbin:https://www.pinball.center/en/shop/pinball-modding/pinball-specific/4341/swinging-bell-ringer-mod-for-ac/dc-pro
This is the mod you need. But they are out. I will keep looking.
I don't see them anymore. You can order the parts for a VE AC/DC pro and use them to install one. I will look for the part numbers you need.
Someone else on here has already done this using the following parts from an AC/DC VE. It looks like this is everything you will need to make it happen. This is what they used.
https://pinside.com/pinball/forum/topic/how-to-add-a-swinging-bell-to-acdc-pro
535-0899-00 FRAME, SWINGING BELL, AC/DC PRO 1
530-7880-00 PIVOT SHAFT, SWINGING BELL, AC/DC PRO 1
511-7553-00 ASSEMBLY, BELL/SHAFT, AC/DC PRO 1
242-5091-00 WASHER, 1/2 X 17/64 X .03 - DT 2
270-5002-00 RETAINING RING - 1/4" 2
535-0898-00 MTG. BRACKET, SWINGING BELL, AC/DC PRO 1
232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 2
535-9648-01 BUMPER HOLDER - FASTENED 1
237-6197-00 SCREW, 4-40 X 3/16 PFH U/C 18-8 SS 2
535-1181-00 PENDULUM LIMITER - SWING BELL 1
Quoted from newpinbin:Someone else on here has already done this using the following parts from an AC/DC VE. It looks like this is everything you will need to make it happen. This is what they used.
https://pinside.com/pinball/forum/topic/how-to-add-a-swinging-bell-to-acdc-pro
535-0899-00 FRAME, SWINGING BELL, AC/DC PRO 1
530-7880-00 PIVOT SHAFT, SWINGING BELL, AC/DC PRO 1
511-7553-00 ASSEMBLY, BELL/SHAFT, AC/DC PRO 1
242-5091-00 WASHER, 1/2 X 17/64 X .03 - DT 2
270-5002-00 RETAINING RING - 1/4" 2
535-0898-00 MTG. BRACKET, SWINGING BELL, AC/DC PRO 1
232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 2
535-9648-01 BUMPER HOLDER - FASTENED 1
237-6197-00 SCREW, 4-40 X 3/16 PFH U/C 18-8 SS 2
535-1181-00 PENDULUM LIMITER - SWING BELL 1
I added the Swinging Bell to my Pro, basically It’s the Bell assembly for the VE. It works perfectly with the Pro and IMO looks great !!BC558DD0-DBC9-4A57-992E-009F2F7A055A (resized).pngE71DBBEB-719B-4962-8840-9CA1ED0D38E9 (resized).png65C492FD-3A7B-4AED-AF8D-02AB1D4587A0 (resized).png
Quoted from newpinbin:Someone else on here has already done this using the following parts from an AC/DC VE. It looks like this is everything you will need to make it happen. This is what they used.
https://pinside.com/pinball/forum/topic/how-to-add-a-swinging-bell-to-acdc-pro
535-0899-00 FRAME, SWINGING BELL, AC/DC PRO 1
530-7880-00 PIVOT SHAFT, SWINGING BELL, AC/DC PRO 1
511-7553-00 ASSEMBLY, BELL/SHAFT, AC/DC PRO 1
242-5091-00 WASHER, 1/2 X 17/64 X .03 - DT 2
270-5002-00 RETAINING RING - 1/4" 2
535-0898-00 MTG. BRACKET, SWINGING BELL, AC/DC PRO 1
232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 2
535-9648-01 BUMPER HOLDER - FASTENED 1
237-6197-00 SCREW, 4-40 X 3/16 PFH U/C 18-8 SS 2
535-1181-00 PENDULUM LIMITER - SWING BELL 1
I added the Swinging Bell to my Pro . Basically it’s the Bell assembly from the VE with a few modifications, and will work with the Pro . IMO it looks great !!
20F8174F-2003-4B50-AE46-56FD312A45C8 (resized).png440AEC55-4657-4A50-A55C-2297A4BC4A82 (resized).pngA15C70FB-3CD8-4F49-BAD2-FA8E73583A5D (resized).pngQuoted from BigalzPinz:I added the Swinging Bell to my Pro . Basically it’s the Bell assembly from the VE with a few modifications, and will work with the Pro . IMO it looks great !![quoted image][quoted image][quoted image]
How did you install the train?
Quoted from newpinbin:How did you install the train?
I installed the train by attaching it with a screw, up through the bottom of the plastic that sits below the back of the train and into the bottom back of the train
46350F6B-4C1F-4897-807B-BCC4359DB904 (resized).jpegI am a very late arrival to the club with an original Pro with the Helen translite and playfield decal installed. The previous owner had done a lot of the common mods and I’ve added speaker lights, a colorDMD, lighted flipper buttons and proper service rails instead of the moronic pegs. Love this game… a nice contrast to the style of my other games (Iron Maiden and Jurassic Park)
14AB6C63-469B-48F0-BF37-297AB2858ABC (resized).jpegQuoted from newpinbin:Is that how it's done on the premium?
I’m not to sure if it’s done that way on the Premium , but it works well
Quoted from parsonsaj:I am a very late arrival to the club with an original Pro with the Helen translite and playfield decal installed. The previous owner had done a lot of the common mods and I’ve added speaker lights, a colorDMD, lighted flipper buttons and proper service rails instead of the moronic pegs. Love this game… a nice contrast to the style of my other games (Iron Maiden and Jurassic Park)[quoted image]
Looks great !!! How’s the dog like it when your rockin’out next to him !!
Quoted from Shenanigander:Haha...just got home an hour ago and found a box of happiness at my door! I will be installing tonight hopefully and I will take a video of the action!
I also played a ONE of a kind custom ACDC homebrew pin today. Remind me to post the link of that video when I get it edited!
Let there be rock?
Quoted from BigalzPinz:Looks great !!! How’s the dog like it when your rockin’out next to him !!
Haha the dog was scared of the game at first but she’s fully used to it now.
It’s only in this room temporarily until I finish working on it… no room to work in the gameroom!
Quoted from Shenanigander:Haha a little sneak peek of gameplay Need my opto board!!!! cant get any song jackpots Managed to get over 200mill last night with no song jackpots last night though so I was proud of me
Any AC/DC Shenanigans going on today?
My first question for you veteran Pro owners from a very new member of the club... and as with most of my questions, it's probably a dumb one!
One of the previous owners of this game seems to have installed a variety of different colored LEDs into the song panels of the jukebox. Some of them are blue, some red, and some white (perhaps 2 different shades of white). I would like to get this back to the way it left the factory, which I think is probably warm white. Can someone confirm that this is how the original Pro was configured?
A further question... is there a way to remove the jukebox cover to access the bulbs from the front, or do you have to get to them from the back? It seems tight to work on back there, since all the sockets are so close together... At least now that I put real service rails on the game, getting to the back is possible without having a helper!
Quoted from newpinbin:Any AC/DC Shenanigans going on today?
Yes indeed! Just posted a couple videos including gameplay action of the finished product!
Also here is the one of a kind custom AC/DC made from a Space Shuttle and converted to DMD... link should take you right to the action...
Quoted from newpinbin:Great videos, just what I was looking for.
Glad you enjoyed!
Anyone ever switched out the factory "chrome" T-molding on the backbox to something that might fit the overall color scheme of the Pro better? I am thinking about doing that. I've never changed t-molding on a pin before... what's the right size to order for the Stern wooden backbox?
Quoted from BigalzPinz:Agregué el Swinging Bell a mi Pro, básicamente es el ensamblaje de Bell para el VE. ¡Funciona perfectamente con el Pro y IMO se ve muy bien![quoted image][quoted image][quoted image]
My friend BigalzPinz where do i buy the bill swinging??? Thank you!!
Quoted from parsonsaj:Anyone ever switched out the factory "chrome" T-molding on the backbox to something that might fit the overall color scheme of the Pro better? I am thinking about doing that. I've never changed t-molding on a pin before... what's the right size to order for the Stern wooden backbox?
They were out of smooth but I actually like the texture. I also bought red and kinda flop back and forth. It's cheap I would buy a a few different colours it only takes a few minutes to swap.
Quoted from parsonsaj:Anyone ever switched out the factory "chrome" T-molding on the backbox to something that might fit the overall color scheme of the Pro better? I am thinking about doing that. I've never changed t-molding on a pin before... what's the right size to order for the Stern wooden backbox?
Black with texture looks great !! This is what you want 735FBF1F-7FE2-4380-9877-3EA16537B46D (resized).jpeg
F2AE9684-E73B-4116-A5CB-BE0B554F8BC0 (resized).pngF369D3B7-BDAC-4706-B032-5816F20C056B (resized).jpegQuoted from ariel_nizza:My friend BigalzPinz where do i buy the bill swinging??? Thank you!!
You can buy the entire assembly for the swinging bell through Pinball Pirate , they are a Stern Distributor, email Christopher Kuntz at [email protected] , they are super nice and will set you up , little spendy, but so worth it , IMO
1 month later
Does anyone sell the divots for the Fire plate on the lockdown bar? Thinking of getting my Pro powdercoated. Thankd.
Stockton-on-tees
Quoted from pinballjah:Does anyone sell the divots for the Fire plate on the lockdown bar? Thinking of getting my Pro powdercoated. Thankd.
Quoted from pinballjah:Does anyone sell the divots for the Fire plate on the lockdown bar? Thinking of getting my Pro powdercoated. Thankd.
What color are you thinking ?
1 week later
Quoted from Palmer:Does anyone know what happens when a song plays to the end. Does that song just start over again?
Yes. Until you shoot the jukebox when lit, or drain.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
