My War Machine spinner is barely recognizing a solid shot up the left lane.
I noticed the metal spinning arm is resting on a screw that holds the bumper (to the right) in place. (See picture)
The metal arm that holds the spinner has a flat wear spot that causes the target to rest at an angle instead of straight up and down. (See picture) The ball will typically go right under without touching the target, sometimes it will brick off the front.
I have been messing around with adjustments and can't seem to find one that works. I tried loosening the screw and moving the bumper to the right, but it didn't help. I'm tempted to cut a few milimeters off the arm so it doesn't touch the screw.
I'm hoping someone can point me in the right direction here.
Thanks,
Brad
87FAD0C8-93DA-47BB-80B5-4AEA8B1A3636 (resized).jpeg
2F984F46-707D-4CC3-A184-BF2568EDD867 (resized).jpeg