Lakewood, CA
I’m interested in looking for a Luci vault what’s the going rate on these so I can have a idea if one comes up
Thanks
(Topic ID: 86651)
Linked Games
AC/DC (LE)
Stern, 2012-
AC/DC (Premium)
Stern, 2012
Topic Gallery
You're currently viewing posts by Pinsider blackzarak.
Click here to go back to viewing the entire thread.
2 weeks later
Hey fellas was hoping to get some little help/advice I have a AcDc vault Luci and wanted to get a color DMD just not sure what’s the difference And which is the right one to purchase I seen colordmd has different kits/version.
http://shop.colordmd.com/colordmd-replacement-display-for-ac-dc-pinball-machine/
http://shop.colordmd.com/led-replacement-display-for-ac-dc-pinball-machine/
Help would be appreciated
4 months later
Quoted from seah2os:I have a Premium Vault that I’m trying to install a ColorDMD on, and I’m stuck. The issue is that there are six permanent bolts that held the original DMD, but there are only four holes, (in the corners), on the new DMD. No mounting holes in the center of the ColorDMD. I understand that spacers are provided and used to offset the difference in the new DMD’s bigger size, but the spacers do not prevent the middle bolts from coming dangerously close to touching the screen. Plus, even if there weren’t two middle bolts, I would still have a visual 3/4” gap between the plastic and the DMD from the front when installed and put back together. Who has a Vault and has installed this? Thanks!
[quoted image][quoted image][quoted image][quoted image]
You have everything there to install your new DMD. The 4 spacers with male thread and you should have the black original spacers as well you only use the 4 corner threads to install the dmd, the middle ones will not be use obviously it’s going to hit the screen. A gap between the metal box and DMD is normal you’ll have to purchase the gasket kit to fill in the void, but to be honest you really don’t need it I never use it on my install I can send pics if needed.
Quoted from seah2os:I have a Premium Vault that I’m trying to install a ColorDMD on, and I’m stuck. The issue is that there are six permanent bolts that held the original DMD, but there are only four holes, (in the corners), on the new DMD. No mounting holes in the center of the ColorDMD. I understand that spacers are provided and used to offset the difference in the new DMD’s bigger size, but the spacers do not prevent the middle bolts from coming dangerously close to touching the screen. Plus, even if there weren’t two middle bolts, I would still have a visual 3/4” gap between the plastic and the DMD from the front when installed and put back together. Who has a Vault and has installed this? Thanks!
[quoted image][quoted image][quoted image][quoted image]
Here are the pics how it’s installed
1st Black spacer
2nd 2 washers
3rd hex spacer with thread on top
4th installed DMD then nuts and done
The center threads shouldn’t be touching the screen if done correctly, the black spacers I belive are original from the DMD you removed I’m assuming you have the metal speaker box if it’s wood it’s a different application.
F6B9BF57-CC25-4176-B93D-FD3C282C5CF3 (resized).jpeg
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider blackzarak.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
