The lower leds are dropping out on mine. If I send them to you, will you add the secondary trace?
Quoted from HOOKED:Early 1.0 v and some 2.0 v had issues with the lower section of leds dropping out. The fix at first was to reflow solder. The secondary trace was added in 2014 and the issue has stopped. If you happen to have an early set they can be fixed by adding the trace or you can get replacement PCB assemblies on our site and just reuse the original frames.
Early versions had the PCB board riveted to the frame which has been revised 3.0v going forward.
Hookedonpinball.com