Yeah I’d be all over that too.
You're currently viewing posts by Pinsider NightTrain.
Click here to go back to viewing the entire thread.
I just got my AC/DC Luci Vault. Can someone tell me if the lower play field window is adjustable? Mine needs to come up a bit to get flush with the play field.
Hey guys. Just got my Luci Vault and I’m having issues with the cannon. It’s loud and it hangs up/catches. I inspected and can’t find anything binding. See video. Any ideas? Should I reach out to stern and have them send me a new assembly?
Quoted from xsonics2k2:Hard to tell from vid if it is rubbing against the plastic ball return... if so, unscrew the plastic ramp (see photo) and move it away from cannon.
Ha! I was just coming back to post the fix. You are correct. That is exactly what was happening. I actually couldn’t adjust the ramp any more so I just gave it a little trim with an exacting knife. Looks perfect and plays great now. Good eye!
So I’ve read that the Bell is supposed to swing when using a VIP pass or making shots during hells bells. Mine does neither. I tested the Bell magnet in test mode and it works like it should. Is this normal? Did this get changed with the recent code update? Am I crazy?
Quoted from Rensh:I have read others reporting that with the new code the bell doesn’t swing anymore
Really? Well that sucks but if that's the case at lease I know something isn't jacked up on my machine.
I’m looking to add a color DMD to my Luci Vault. Has color DMD updated the rom for the 1.7 software?
Quoted from Dent00:Nope.... 1.70 code is still not available from ColorDMD. Yet...
You can get 1.68 though...
Graphics that are not coded in 1.68 code come up in red/amber on 1.70 code.
Perhaps one day they will catch up to Stern.
Thanks for the response. How many things come up that are not colorized?
Quoted from Strummy:How do you get to Encore?
You have to play all of the songs. So you light 8 shots. Shoot the jukebox. Change the song. Rinse and repeat 12 times. Then hit the jukebox to start Encore.
About 20 minutes ago, I had encore lit again. I aimed for the right loop to start it. I hit the thunderstruck target and drained. Mother fuc$er!!!!!!
Still put up 375k point though. It still hurts....
Quoted from adam12hicks:Hi guys! I'm super late to the party, but I just traded for a super clean AC/DC 2018 Luci re-issue. Everything works flawlessly but I need a quick assist on two things.
1 - What can I use to VERY slightly raise the lower playfield glass so that it's flush? It has a small lip that definitely changes the trajectory of the ball.
2- Does anyone know what powdercoat / color Stern used for these? My side armor has a small chip out of it so I want to take it to the folks who have done my other pins and have it re-finished.
Other than that, it has the big topper with the bells and logo / horns, some minor playfield mods and the latest code. In 9.5/10 condition easily. Just needs to be played
Thank you!
Welcome to the club. It’s such a great game. Just fired mine up tonight for the first time in probably 6 months. I forgot how awesome this game is.
I also have a Luci vault and needed to raise the lower play field window. I took one of the screws out and brought it with me to Home Depot. I found some tiny o-rings that fit it perfectly.
Take the entire window out. Insert the screws into all of the holes and carefully flip it upside down. Then put an o-ring on every screw (some may need two). They should be tight enough to hold the screws in place when you flip it back over. Then just screw it back down gently and tighten as needed til it’s all flush. Not all screws will be super tight and that’s OK. The o-rings kind of act as a lock washer. I did this to mine when I got it NIB and haven’t had to adjust it since. Butter smooth now.
Good luck and enjoy the game!
Quoted from adam12hicks:Perfect - thank you! I’ll do that today. Were the o-rings in the pull out drawers or are they fit something specific? Seems so small!
I think I found them in the drawers.
Quoted from Sparky:When I pulled my vault window, it already had rubber washers and rubber o-rings.
Maybe mine did too. Either way, I added more to flush it up.
Has anyone tried a different color T-molding on their premium? Mine has the factory chrome. I was thinking about switching it out to Black or Red. I'm not a chrome fan.
If you've changed yours out and could share a picture, that would be awesome!
You're currently viewing posts by Pinsider NightTrain.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/acdc-premium-club?tu=NightTrain and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.