Quoted from seah2os:

I have a Premium Vault that I’m trying to install a ColorDMD on, and I’m stuck. The issue is that there are six permanent bolts that held the original DMD, but there are only four holes, (in the corners), on the new DMD. No mounting holes in the center of the ColorDMD. I understand that spacers are provided and used to offset the difference in the new DMD’s bigger size, but the spacers do not prevent the middle bolts from coming dangerously close to touching the screen. Plus, even if there weren’t two middle bolts, I would still have a visual 3/4” gap between the plastic and the DMD from the front when installed and put back together. Who has a Vault and has installed this? Thanks!
[quoted image][quoted image][quoted image][quoted image]

Quoted from seah2os:

I have an AC/DC Premium Vault with Flipper Fidelity speakers in the cab and back box. The sound is great, however, I was considering adding this Onkyo SKW-570 163 watt subwoofer. The sub has an RCA input only. Thoughts and opinions? ...Do I unhook the bass in the cab, or splice in and add the sub with the bass in the cab? Is anything else needed? What are the extra two yellow/black stripe wires next to the cab speaker for? Or do I leave well enough alone and hook up the sub to my BKSOR or MM? Thanks for any input.
[quoted image][quoted image][quoted image][quoted image]