Quick note to new buyers and those that have not tried our lightning bolts yet.
Version 5.0 will be released this month.
Due to popular demand Yellow is back, Blue & Warm white are 15% dialed back (people said they were a bit too bright in dark settings).
We have relocated the power tabs to the bottom of the PCB and added factory installed secondary lower power trace.
We will be making a new vid to showcase the changes.
The 4.0 version currently on the site will be the brightest we ever make and there are a few kits left.

https://www.hookedonpinball.com/store/p17/ACDC-4th-Generation-Lightning-Bolts-Pinball-Mod.html

No not discounting gen 4 at this time. Once Gen 5 hit Gen 4 will be marketed as the brightest option recommended for lit areas.
We have 10 sets for blue and 12 for the warm white option.

For those watching the metal apron upgrade we sell, those we are under a handful of each color and will not be running them again.

Thought there was going to be a GI black out for back and black mode at one point.
Its a great game hope they run it again and keep tweaking it.

Early 1.0 v and some 2.0 v had issues with the lower section of leds dropping out. The fix at first was to reflow solder. The secondary trace was added in 2014 and the issue has stopped. If you happen to have an early set they can be fixed by adding the trace or you can get replacement PCB assemblies on our site and just reuse the original frames.
Early versions had the PCB board riveted to the frame which has been revised 3.0v going forward.

Hookedonpinball.com