AC/DC (LE)
Stern, 2012
AC/DC (Premium)
Stern, 2012You're currently viewing posts by Pinsider WeirPinball.
Click here to go back to viewing the entire thread.
Quoted from pinballaddicted:If Stern use SAM yes. Color DMD will fit, just make sure you buy the metal back box option. If Stern use their Spike system, email color DMD. The guys there are extremely responsive.
Can't imagine it would be spike - should be the same as the other vaults...
Why is Spike coming up in this thread - this game will be SAM. You really think they would spend the $$ to re-engineer this to a spike system?
Quoted from jester523:I was either told or imagined someone telling me mid to late february they were shipping. It might have been the distributor that told me, but at this point I can't remember.
I was told the mid feb by my distro. Hopefully pretty soon.
Quoted from NightTrain:Yeah pretty much. I was under the impression these were shipping this week. Anyone hear anything?
Nothing yet- I ordered the moment they were announced.
Quoted from Pinnutz:Thanks, I'll dig into it tonight. Hopefully it's something simple
I've had a nib game where they forgot to wire the gi in the back panel before - so you never know.
Quoted from pinaround2:Mezel mods are great. They’ve been around awhile. I got the red framed bolts to go with LUCI. Plug and play. Plugs into existing harness.
Pinbits also makes a very nice set
Pinbits
Quoted from cooked71:What’s the difference between the Mezel and Pinbits?
Take a look a a pic of each - you be the judge of which one is best 
Quoted from BlueIrocGuy:Has anyone seen and compared the Pinbits version with what Hooked on Pinball has for a lightning bolt flasher? They look pretty similar but I don’t think the hooked version has flashers on the back? Looks like a lot more leds on the front side though.
Yes, they are similar - the pinbits don't have flashers in the back either. Completely integrated.
Quoted from robotron:anybody here change their speakers over yet?
was wondering if it made a difference i think stern upgraded these speakers on the ve.
External sub is awesome - haven't done it yet to luci but did on my others
Quoted from rennervision:I posted this photo in a separate thread about my Luci. Just want to be sure this is normal and maybe some other owners can help me out.
Are the two cables I have circled supposed to be connected to anything? (Or are they supposed to be loose like that?)
Also - while installing the shaker motor I noticed a ground wire was traveling right through the spot where it screws in. (Never seen that before.) Are people installing the shaker motor directly over the ground wire or should I move the wire out of the way somehow?
Ground wire is fine - you can put it right on top. Those connectors are always there - probably for a bill acceptor
Quoted from rennervision:Thanks. I've had some issues getting things up and running though. Was finally able to test things out and at first I thought my fire button wasn't working. Well... turns out it is (and works fine in the switch test) but I pretty much have to hit it immediately. If I wait until the cannon is aiming at the AC/DC targets it flat out doesn't work.
Anyone know why?
probably the position switches on the unit. They may need to be adjusted
There is a diagnostic test under ac/dc option called gun - make sure only sw 61 is activated at home and only 62 when it swings a bit left. also make sure your loaded switch on the cannon stays activated with the ball in as it swings
Sounds like your 61/62 might not be working right. 62 should be active when it swings completely left. That is what lets the ball fire so you don't break the ramp
Switch 62 should come on right as it swings left but should stay on when you move to 61 until close to the end. Last thing to check is if the switch blades in the lockdown switch are close enough to reliably close when you push the button.
Quoted from rennervision:Anyone else with a shaker motor notice it interferes with how the tilt plumb bob hangs?
If you can - post a pic, so we can see what you mean
You can bend the ring to try and center the bob looks like if you pull it towards the center of the cab it will help quite a bit.
Quoted from arcademojo:Color DMD finally came in. Do I need anything else to mount it?
Did you get the standoff kit with it?
Quoted from parabol420:Yes, the cabinet uses metal screws that are attached to the backbox display. If you tried to install without some metal standoffs, two screws would go through the screen. You can order their kit, or just use a handful of these, if you have some laying around. Note, I just grabbed the first pic I could find, these may not be the size you need.
Plus it comes with a clear dmd shield
You're currently viewing posts by Pinsider WeirPinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/acdc-lucy-vault?tu=WeirPinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Middletown, OH