AC/DC (LE)
Stern, 2012
AC/DC (Premium)
Stern, 2012I have an AC/DC Premium, and about a couple of months ago I noticed after the ball drained and the machine was tallying up the totals the lights at (AXE) (TNT) (ROCK) (FIRE) and (AC/DC) would flash. Now not only does that happen, but now the general illumination lights are constantly flickering. I ran a diagnostic on all the lights and according to the tests everything is fine. Any help would be greatly appreciated.
I have the exact same problem with my AC/DC premium. No errors. Reseated all connectors but issue still there.
Quoted from smassa:Sometimes you can try reseating the plugs attached to this bridge.
And that fixed it!!!! Thank you.
Quoted from smassa:Sometimes you can try reseating the plugs attached to this bridge. Eventually I just replaced it and bought a few spares to have for future use.
This fixes the GI flickering not the insert issue.
Wouldn't happen to know the part number would you? Where did you get your spares? Thanks
Quoted from MJW:Wouldn't happen to know the part number would you? Where did you get your spares? Thanks
http://www.marcospecialties.com/pinball-parts/112-5000-00
or
http://www.marcospecialties.com/pinball-parts/KBPC3504-L
Id have to check inside my machine to see which one I bought.....Not sure off hand but I think its the 2nd one.
Pretty sure these are the ones I bought.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/acdc-gi-lights-flickering and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Kingman, AZ