You crossed a 2^32 boundary. 2^32 - 1 = 4,294,967,295. I betcha that value works. Might be that stern is using a 64 bit value, and the pinball browser only supports a 32 bit value at this point.
You're currently viewing posts by Pinsider openpinballproj.
Click here to go back to viewing the entire thread.
You crossed a 2^32 boundary. 2^32 - 1 = 4,294,967,295. I betcha that value works. Might be that stern is using a 64 bit value, and the pinball browser only supports a 32 bit value at this point.
I don't know how the pinball browser works, but you might be able to change a field just above it or just below it to fix it. So in your case, you would change the field above or below to 1, and then set the score field to 343,192,854. Since it is a 64 bit field you might be able to break it into 2 32 bit fields that the pinball browser will understand. So the upper 32 bits are simply 1, while the lower 32 bits should be 343,192,854. I'm not sure if you have access to each of those fields, but if you do, that should fake out the browser to write the correct values into memory for the pinball machine.
You're currently viewing posts by Pinsider openpinballproj.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/acdc-display-and-modify-dot-matrix-images?tu=openpinballproj and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.