My buddy Eddie came up with this one. Drops right over the aluminum block. It takes more time to take the glass off. 15 dollars, it's hand painted.

https://www.etsy.com/listing/166065393/bell-mod-for-the-acdc-pinball-machine?ref=shop_home_active

image-791.jpgimage-531.jpg

Number 1 has been sold. His machine is now worth 10k by Christmas.

That's why I am only shipping to the US, you Aussies just don't get it. Anyway, it fall off down there. Just kidding.

Give me a break / Give me a break / Break me off a piece of that kit kat bar / That chocolate crispy taste is gonna make your day...

I will add the shipping to Australia, so the band can get a set for their machines.

Captain,

Sorry no birch, only thermoplastic aliphatic polyester.

Australia shipping getting added now to shop site.

Got a comment from the king himself, Steve Ritchie.

image-537.jpg

Not yet because his freebie box gets bigger by the day. He is getting a Donut Heaven, bell cover mod, something Star Trek and a WOZ twistnado. Oops, not the twistnado.

I may have to buy a frequent buyer program. Free nut scratcher.

Don't look at the LED speaker for Metallica then.

They are going to ship in a couple days. I have quite a few to make so I am pumping out a batch.

Yes the back is covered but not with the wood design. When it swings it is not noticeable.

Shipping has been updated to worldwide.

https://www.etsy.com/shop/Pinballmods?ref=si_shop

Production is up and running.

image-504.jpg

I will be making one for the Pro version too!

Okay twist my arm. I will lower it back to 15. I had to buy some expensive Tamiya hobby paint to get the wood effect to come out the best. I will see how it goes.

Thanks for all the good feedback. I am almost done with the Pro version. I just need an ACDC of my own now. My wife keeps telling me, "I hate that Metallica machine, I wanted ACDC." Someday.

Heads up bulletin here. Fellow pinsider alerted me with a problem he had where the bell hit the opto board. There are many out in the wild and have not heard of any other issues. I will investigate this further when I can get a look at another machine.

Argh. Sounds like we need a little quality control at the factory. Thanks, I have now added the heads up on the site for future sales.

I would suggest seeing if the opto has any room to move. If not, I will customize one for you.

Final design is on it way to be fitted, it's only a matter of days!

I thought I had paypal as an option. I do now!

I will PM you so you can get number 0002 when it's ready.

Awesome

Bump

I bumped this after I shipped yours.

The above were shipped 12/4 with priority mail and should be in mailboxes on Saturday if my calculation is correct. The new CEO will be conducting a formal investigation on this issue immediately.

I posted this a week ago, I hope you saw it.

Heads up bulletin here. Fellow pinsider alerted me with a problem he had where the bell hit the opto board. There are many out in the wild and have not heard of any other issues. I will investigate this further when I can get a look at another machine.

This seems to be an issue on about 2% of the machines. Another pinsider was able to tighten the opto board and not modify the mod.

No worries whatsoever. It happens. Enjoy the mod! Watch out for that opto! Thanks for the nice reply.