How do we pay? I want to protect my game before the damage. THX

My Bell Protector fit nice and tight. I tapped it into the hole with a nut driver narrow end first and the back of the protector sat right down in the hole. Then I just started each screw about a 2 turns till I had all 4 in the proper holes then torqued them all down for a nice tight fit. Looks like OEM when installed. Thanks

My protectors are in and I have not an issue. If I recall correctly their are 5 screws. I would remove them and tighten the fours screws that make the base first, then hit that 5th top screw last. Email [email protected] or (McCune) they've got some pictures of installation and that may help. No problems on my game play here. Post a picture of your installation. We might be able to figure it out. Good Luck

Here are the pics that were sent to me so I could install them. I'd bet you may have them in backwards or something. My game looks like the pictures. I don't know what the ball would be hitting unless you mount the VUK at an angle. I guess I'm not all that sure the ball stayed in 100% before I installed them.

DSC09988.jpg IMG_0375.jpg IMG_0376.jpg